Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Mishimoto 2025+ RAM 1500 3.0L Hurricane Baffled Oil Catch Can Kit - BlackBlow by is inevitable on a high output truck like the Ram 1500 3. 0 Hurricane, and every bit of oil carried through the PCV system ends up coating the intake tract, lowering octane, and adding stress to a powerplant built to work hard. Our Baffled Oil Catch Can Kit gives your Ram 1500 3. 0 Hurricane a simple way to keep that contamination out of the turbo, intercooler, and cylinders by placing a single can in line with the PCV route to pull oily vapor
Blow-by is inevitable on a high output truck like the Ram 1500 3.0 Hurricane, and every bit of oil carried through the PCV system ends up coating the intake tract, lowering octane, and adding stress to a powerplant built to work hard. Our Baffled Oil Catch Can Kit gives your Ram 1500 3.0 Hurricane a simple way to keep that contamination out of the turbo, intercooler, and cylinders by placing a single can in line with the PCV route to pull oily vapor out of circulation before it can settle anywhere it should not. As crankcase gases enter the can, they move through a 50-micron bronze filter and an internal diverter that holds the air in motion long enough for fine droplets to condense and fall into the canister. What returns to the intake is clean air that will not dilute octane or contribute to carbon buildup.--This kit is engineered specifically for the 2025+ Ram 1500 3.0 Hurricane and was designed and tested in the USA. The billet 6061 aluminum can, CNC-machined fittings, and internal baffling provide reliable separation, while the robust bracket positions the can near the headlight to keep it isolated from engine vibration. The layout fits with the stock engine cover and tucks neatly into the bay for a factory quality appearance. Preformed hoses match the Hurricane's PCV routing for a straightforward install that takes less than half an hour and requires no trimming or modification. Servicing is just as simple thanks to the fully washable filter and easily accessible mounting location.--This system is built for Ram 1500 3.0 Hurricane owners who want a dependable, direct fit solution that protects a serious investment. Cheap universal kits cannot offer the same precision or confidence. Our catch can is secure, serviceable, and crafted specifically for the Ram 1500 3.0 Hurricane, and every component is backed by the Mishimoto Lifetime Warranty.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 2247 reviews
Sort
Product Reviews
★★★★★ 5
Rather pricey.
Excellent vacuum, but I couldn’t justify the price knowing I have another Miele vacuum that works just as well as this one. My current Miele is 27 years old, works perfectly with all attachments, and only cost $20 several years ago. Hard to spend $500 for what I already own. However, if my current one fails, this will be its replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 4
Close to perfect
This model is among Miele's most recent ones, and benefits from a few small but significant improvements on that account. I'd say that all but one of the components are both beautifully made and beautifully conceived. The floor head initially strikes me as problematic, and for exactly the reason that's suggested by a great many customer reviews of Miele floor heads, which is that when attempting to vacuum even low pile carpet there is a dramatic tendency for the head to essentially glue itself to the carpet. The vacuum power needed to be set on the second lowest of four settings to be able to slide the head over the carpet at all, with either of the two settings of the floor head (carpet or bare floor). So it seems to me that Miele still hasn't figured out how to make a single, multi-purpose floor head, or at least one that isn't electrically powered with a motor in the head to rotate a brush. They do also have air-turbine powered head brushes and models with no rotating brush like the one that comes with the Guard M1. Many types in all. The noise level of this model is even lower than I had hoped and this is one feature that has been further improved - excellent. Also, note that you can replace the default exhaust filter with a separately purchased HEPA filter if that's what you want: 99.999% filtration of the bag plus the HEPA exhaust filter rather than 99.99% filtration of the bag plus the standard, thin, provided, cheaper exhaust filter. This could be important for either allergy issues or safety vacuuming where rodents have made a mess, which can be quite dangerous. Best to lightly spray with dilute chlorine bleach first. There are four exhaust filter grades to choose from. The most basic is the supplied one. Miele desperately needs to improve their documentation to help customers figure out all the variables in their very complex system of models and features. I like this machine a lot. I just need to figure out a better way to vacuum flat surfaces (floors) which are both bare and carpeted. We have almost no high pile or shag rugs (one), so I figured this basic head would be a good choice but I'm concerned that I might never choose to use it on our carpets. Not sure yet. Otherwise close to perfection. One other thing: it's too easy to attempt to insert the bag backwards and not realize it! Oh, one other thing - The cover door for the motor protection filter was stuck closed. It's supposed to snap open when pulling on the handle with modest force but a strong pull didn't to do the trick. There's a slight defect in the mold of one of the two parts where the latch functions. I eventually got it open and used a jeweler's file to very slightly take the edge off the stationary part and now it's fine, but a person could break the cover door trying to overpower the latch. This is a factory defect that's tiny but with potentially very large consequences.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 19, 2026
★★★★★ 5
Best Investment Ever! A Vac-Mop!!!
Color: X40 Ultra/ L40 Ultra & P10 Pro /P50 Pro
These are replacement tools that fit our multipurpose vac/mop. This product is the most helpful and productive item we own. My daughter and I are free to do other things while Miss “B” is busy cleaning our floors! Such a backsaver! The floors are cleaner than manually sweeping and mopping them ourselves! It doesn’t get any better than that!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
★★★★★ 5
This is a Yes!
Color: X40 Ultra/ L40 Ultra & P10 Pro /P50 Pro
I needed to change out my Dreame vacuum accessories but didn’t want to pay the huge amount for the name brand kit, this works beautifully and fit perfectly. I cannot tell a difference and it lasts just as long as the original!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2026
★★★★★ 1
Side brushes don't fit.
Color: X40 Ultra/ L40 Ultra & P10 Pro /P50 Pro
The side brushes don't fit L40 Ultra.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
recommand products
Prothane Universal Bump Stop 2 1/2 Multi-Mount - Black
134.99
Gedore 702 88 M Feeler gauge set, fan pattern 0.03-0.10 mm 6547600
17.92
Prothane Universal Sway Bar Bushings - 1 5/16in for B Bracket - Red
51.99
EBT62854104 LG Main Board, EAX65405504(1.0), 50PB560B-UA
48.99
Raw Gemstone Bloodstone Dangly Earrings
50.00