Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
APR PEX Intake - 3.0T S4/S5 - Audi B9This is the perfect intake upgrade for the Audi S4 and S5 (B9). It flows 31% more than stock, reduces pressure drop, and improves turbocharger efficiency. This directly translates to +19 AWHP and +20 AWFT LBS of torque on top of our Stage 1 (93) tune making this a simple upgrade for more power you can feel, and does so at an incredible value. Our system is a full upgrade as it replaces all of the intake components from the inlet scoop all the way to
This is the perfect intake upgrade for the Audi S4 and S5 (B9). It flows 31% more than stock, reduces pressure drop, and improves turbocharger efficiency. This directly translates to +19 AWHP and +20 AWFT-LBS of torque on top of our Stage 1 (93) tune making this a simple upgrade for more power you can feel, and does so at an incredible value.
Our system is a full upgrade as it replaces all of the intake components from the inlet scoop all the way to the turbo inlet. This is extremely important as focusing on the airbox alone does not address the main restrictions found in the factory intake system. Simply put, our system flows better than stock, makes more power, puts less strain on the turbocharger, looks great under the hood, and enhances the sound of the engine. The factory turbocharger inlet pipe is a big restriction point because it's small. It's common for most intake systems to only focus on the filter and airbox, but doing so only has minimal impact on performance. Furthermore, upgrading the turbocharger inlet pipe only has minimal impact on performance if it still necks down to with the factory or aftermarket intake airbox. We solve this by making our pipe as large as possible from the 4" filter outlet all the way to the turbocharger inlet in one piece! This minimizes pressure drop and increases flow through the system far better than a multi-piece solutions. Our system is made from PEX and looks great stunning under the hood, matching the texture of other components. By using this material we are able to make the wall-thickness of the tubes smaller, maximizing the internal diameter, increasing performance even more! The material also allows us to make complex organic shapes necessary when working in a tight engine bay. The airbox is fed from an inlet scoop that maximizes the flow path into the airbox. The airbox has cutouts allowing for additional flow paths directed away from the engine. This keeps air temps down, and increases sound without it being overbearing. The filter is massive as well. A big filter is desirable as increasing filtered surface area keeps the filter breathing easily for many miles as it filters dirt, dust, and particles. It measures 7" by 7" with a 5.5" frontal inlet, and a 4" outlet. The filter media is a washable pleated cotton gauze that can be cleaned for extended life, or replaced with ease. Our kit includes everything you need to bolt on and go. No new tuning is needed to run this product, and the product is emissions friendly. We include all new OEM gaskets and all the nuts, bolts, and clamps needed for an easy install. Lastly, thanks to our billet turbo inlet adapter, this is the only intake you'll ever need. Should you later upgrade your turbo, a new, larger adapter can be installed to adapt to the larger inlet simply by swapping out the billet adapter!
Features:
- Full intake system: Inlet, airbox, filter, and inlet piping
- +19 AWHP & +20 AWFT-LBS gain over stock (APR Stage 1 93)
- Flows 31% more than stock
- Reduced pressure drop at the turbo inlets
- Improved linearization across the turbos
- Enhanced engine sound
- OEM appearing PEX construction
- Turbos spool faster
- Turbos operate more efficiently
- Massive 7” x 7” filter with a 4” outlet and 5.5” frontal inlet
- High flow and washable pleated cotton gauze filter material
- Airbox has additional flow paths faced away from the engine
- Inlet piping diameter is maximized from the 4” filter all the way to the turbocharger
- Inlet piping addresses system restriction, unlike competitive airbox systems that are compatible with factory inlet piping
- Billet turbo adapter ring make fitting this system to a larger turbo possible
- New OEM gaskets included
- Incredible Value
- Emissions friendly
| Brand | APR |
|---|---|
| Emission Code | 7 |
| Filter Color | Red |
| Filter Material | Pleated Cotton Gauze |
| Material | PEX |
| Product Type | Intake System |
| UPC | 810009933595 |
| Part Number | CI100047 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 2381 reviews
Sort
Product Reviews
★★★★★ 5
Best toy for heavy chewers
Color: Green
My dog is an aggressive chewer and I have trouble finding toys that last longer than 5 minutes before being so destroyed it is no longer safe to let him keep it. He loves this toy and naws on it for hours daily. Yes, it has multiple chew marks, but it is still intact completely. No little pieces have been chewed off. I highly recommend this toy for any dog especially those who destroy every toy in seconds like mine does.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 12, 2025
★★★★★ 2
NOT Indestructible and a Nylon Product (NOT A CHEW TOY)
Color: Green, Color: Green
I gave this dog toy 2-stars based on my dog toy rating system (DTRS) for “Bruce” the Green Alligator!
Unfortunately, I didn’t notice in the fine print of the product description on the website that this toy consisted of Nylon. If I noticed that description, I would’ve never purchased this product. Please do your own research on Nylon wrt teeth. I wasn’t impressed with the toy construction out of the box. The nylon head and tail sandwich the rubber body with soft rubber spines on Bruce’s back for easy gripping. This is not an “Indestructible” dog toy.
Safety (1-rating):
1. I was always concerned about my dog’s teeth possibly cracking while he was chewing on Bruce’s Nylon ends. Thankfully, his teeth were fine throughout the use of this toy.
2. The Nylon came off in small pieces after a few hours and continued for the life of the toy; see picture. I never intended for my dog to swallow pieces of Nylon.
3. Bruce’s rubber rear end is where most of the damage occurred, as my dog was tearing off pieces of rubber and spines, which he thankfully passed through his system over a period of 2-3 days after I threw Bruce away; see picture.
4. The chewed-up Nylon ends were very hard, rough, sharp and pointy. There were occasions where I noticed my dog’s gums were bleeding as a result of chewing this toy.
5. Bruce is big enough not to swallow in its entirety, which is why I’m giving this a 1-rating for safety.
6. This is a molded product and not a plush product.
Durability (2-rating):
1. It took my dog 1 to 2-weeks to get the toy in the shape that is shown on the posted photos.
2. The Nylon was immediately being scratched and scraped apart on day-1. Then I noticed pieces of Nylon coming off of Bruce after 3-4 days.
3. The rubber was immediately being punctured with small divots around the body on day-1. I noticed over the next couple of days that my dog was focusing on the rear end and trying to pull the rubber off the Nylon tail.
4. The rubber started coming off more quickly after 1-week, until I removed it all together.
Squeaker (N/A):
1. Bruce has no squeaker.
Fatality (2-rating):
1. Bruce had a longer life than most of my dog’s toys, but then again, I expected this to last much longer as the seller claims it is “Indestructible”, which it is not.
2. I tried filing off some of Bruce’s chewed up Nylon ends to smooth them out for more chew time, but came to my senses and just threw him away for safety concerns only.
In conclusion, “Bruce” the Green Alligator should not be given as a chew toy, but more as a fetch toy, unless you want your dog to digest the Nylon and rubber materials.
Days of Enjoyment
Given to Dog: 12/16/2024
Dog Toy Death: 01/08/2025
Total Days Used: 13 days (11 days spent away from home during the holidays)
About my dog “Cannoli” for comparison
Breed: Blue Healer / Lab mix
Sex: Male
Age: 8-months
Weight: 45-lbs
Size: Medium
Energy Level: High
Chew Rating: Aggressive
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2025
★★★★★ 5
This has been a challenge for my extreme chewer! The toy is winning
Color: Green
Indestructible? Not for my pitbull. Except on this toy. She has slowly chewed some of the outer portion on the backside, but it still has a lot of gnawing time left. This is her go-to toy now. she carries it nearly everywhere. She loves it. I am amazed at how well it is holding up. Within minutes, hours or a few days, the other "indestructible" toys I've purchased, never survived as described.
This is a heavy toy! Not for the weak! I cannot stress enough the extreme chewer my dog is. Yet, I can see this toy lasting months. It won't be pretty then but it will most likely still be a favorite chew toy. I'm glad I found this and will be buying more.
FYI's... 1) Chewability-5 stars 2) Softness-1 star, it's solid but chewable, 3) Bounce-0 stars, No bounce, it's heavy!, Playability- 5 stars. My dog plays with it, lets it lay with her when resting. Nearly always within her reach. She sleeps with it! That's love.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2026
★★★★★ 5
My buddy has been chewing on this for an hour!
Color: Green, Color: Green
This dog toy has been a great addition to our dog’s toy collection! My dog can be a pretty aggressive chewer, so I’m always looking for toys that are durable and can actually hold up to daily play. This one has been surprisingly tough and has lasted much longer than many other toys we’ve tried.
The material feels strong and well made, and the design makes it easy for my dog to grip and chew. He loves carrying it around and tossing it during playtime. It’s also great for keeping him busy and helping reduce boredom, especially when he has extra energy to burn.
Another thing I like is the texture of the toy. It seems to help keep my dog engaged, and it’s sturdy enough that I don’t worry about it falling apart right away like some softer toys do. It’s been used for chewing, tugging, and even some fetch around the house, and it’s still holding up really well.
The only small drawback is that I wish it had a squeaker inside. My dog absolutely loves squeaky toys, and I think that would make it even more exciting and keep him interested for longer periods of time.
Overall though, this is a very solid and durable dog toy that’s perfect for dogs that love to chew. If you’re looking for something tough that can help keep your dog entertained and reduce boredom, this is definitely worth try
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 5
Great Toy For Aggressive Chewers
Color: Green, Color: Green
My Boy loves it! It is a little heavy but it keeps him busy. Very strong and sturdy for aggressive chewing. We named it Ally the Alligator. He loves it definitely would recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026