Bizerba GSP-H Manual Meat Cheese Deli Slicer,w/Sharpener Refurbished Hobart 2812

Bizerba GSP-H Manual Meat Cheese Deli Slicer,w/Sharpener Refurbished Hobart 2812Manual gravity slicer GSP H Fully Refurbished, Tested and Working! 13" Blade, Sharp, Quite & Clean. Ships Free to commercial Address. The manual premium gravity feed slicer sets worldwide standards in terms of ergonomics, hygiene, and safety. This manual slicer uses gravity and is easy to operate even when slicing heavy products thanks to its ergonomic, inclined carriage and the Bizerba precision. It stands out due to its wealth of variants.

Manual gravity slicer GSP H

Fully Refurbished, 

Tested and Working! 

13" Blade, Sharp, 

Quite & Clean.

Ships Free to commercial Address.

The manual premium gravity feed slicer sets worldwide standards in terms of ergonomics, hygiene, and safety.

This manual slicer uses gravity and is easy to operate even when slicing heavy products thanks to its ergonomic, inclined carriage and the Bizerba precision. It stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode.

This slicer consists of a powerful blade drive.

In addition, the GSP H can be fitted with Ceraclean® surface which is easy to clean and ensures easy feeding of products to the blade.

Highlights: 

The right carriage version for any application

Drain on the slicing system and drain protection of liquids for a clean work station

Optional hygienic Ceraclean® surface

Optional energy and safety package allows automatic blade start/stop via slice thickness adjustment and visualization of operating state

Product images and technical information could deviate and may not be available in your country.

Further details

Hygiene

Bizerba sharpeners are separate units representing no hygiene risk during sharpening. Of course, same as with all other removable parts, this sharpener can be cleaned in the dishwasher.

Sophisticated design, careful material selection and elegant solutions such as a lifting device for quick and easy cleaning by hand underneath the slicer.

Safety

The optional safety package "Illumination" shows the operator the machine operating state at a glance thus considerably reducing the risk of injury.

Voltage

120 V / 230 V

Housing materials

anodized aluminum

Bizerba Ceraclean® (optional)

fiber-reinforced composite

transparent plastics for food contact

Installation area L x W

532 x 478 mm / 20.9“ x 18.8“

Maximum dimensions L x W x H

GSP H 0°: 770 x 769 x 567 mm / 30.3“ x 30.3“ x 22.3“

GSP H 18° L: 801 x 751 x 562 mm / 31.5" x 29.6" x 22.1"

GSP H 25° L: 809 x 906 x 574 mm / 31.9" x 35.7" x 22.6"

GSP H 25° H: 808 x 908 x 598 mm / 31.8" x 35.7" x 23.5"

Blade diameter

330 mm / 13.0”

Exception GSP H 0°: 350 mm / 13.8"

Carriage inclination

0°, 18° or 25° towards operator

Blade alignment

40° angle

Maximum size of products to be sliced

Height: between 126 and 246 mm / 5.0" - 9.7"

Width: 290 mm / 11.4"

Round: between 202 and 260 mm / 8.0" - 10.2"

The maximum product size depends on the carriage version. GSP H 0° has the largest product feed through, the GSP H 25° H the smallest.

Slice thickness adjustment

Infinitely 0 - 24 mm / 0 - 0.9"

Fine setting 0 - 3 mm / 0 - 0.1”

IP rating

IP33