Design House Coventry Entry Handle Set with Ball Knob and Deadbolt in Satin Nickel

Design House Coventry Entry Handle Set with Ball Knob and Deadbolt in Satin NickelThe Design House 783498 Coventry 2 Way Latch Entry Handle Set accepts a key on one side of the lock but is operated by a turn button handle on the other side. Finished in satin nickel and designed for left or right hand doors, this knob and keyway fit the two most common backsets in the U. S. (2 3 4 inch and 2 3 8 inch). The 1 2 inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back

The Design House 783498 Coventry 2-Way Latch Entry Handle Set accepts a key on one side of the lock but is operated by a turn-button handle on the other side. Finished in satin nickel and designed for left or right hand doors, this knob and keyway fit the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.

Fully reversible handleset that can be installed on both right-handed and left-handed doors
Fits all standard doors with 2-3/4-inch or 2-3/8-inch backsets, and 1-3/8-inch or 1-3/4-inch thick doors
Classic style and finished in satin nickel, Ideal for entry and exterior doors
This entry lock is operated by a key on the exterior and by a turn-button knob on the interior
2-Way latch with a fixed faceplate and round corner radius