Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Firestik FG2-DD NGP 27MHz antenneDe FireStik FG2DD is d oplossing voor betrouwbare 27MHz communicatie in voertuigen die niet over een metalen grondvlak beschikken. Deze No Ground Plane (NGP) antenneset is speciaal ontworpen voor campers, boten, kunststof voertuigen, motorfietsen, pick up campers, landbouwvoertuigen en aluminium vrachtwagens situaties waarin een traditioneel massavlak ontbreekt of onvoldoende is. Het gentegreerde tegengewicht in deze FireStik set voorkomt problemen
De FireStik FG2DD is dé oplossing voor betrouwbare 27MHz communicatie in voertuigen die niet over een metalen grondvlak beschikken. Deze No Ground Plane (NGP) antenneset is speciaal ontworpen voor campers, boten, kunststof voertuigen, motorfietsen, pick-up campers, landbouwvoertuigen en aluminium vrachtwagens – situaties waarin een traditioneel massavlak ontbreekt of onvoldoende is.
Het geïntegreerde tegengewicht in deze FireStik-set voorkomt problemen zoals een hoge staande golf verhouding (SWR) en slechte signaalkwaliteit. De set bevat een 61 cm lange (2 ft) glasvezelantenne, een hoogwaardige 5,2 meter lange FireStik NGP coaxkabel, een RVS antenne-disc met afdichting en een gratis microfoonhaak.
Belangrijkste voordelen:
- Werkt zonder metalen massa (No Ground Plane)
- Betrouwbare communicatie, zelfs bij lastige montageposities
- Snel af te stemmen met gereedschapsvrije tunable tip
- Slagvast glasvezel en UV-bestendige PVC-krimpkous
- Speciaal afgestemde coaxkabel met dubbele afscherming
- Gemaakt in de VS, inclusief fabrieksgarantie
Toepassingen:
- Campers, caravans en pick-up campers
- Boten en jachten
- Glasvezel of aluminium vrachtwagens en daken
- Voertuigen zonder metalen grondvlak (kunststof carrosserieën)
- Installaties op plekken waar onvoldoende massa beschikbaar is
Belangrijke opmerkingen:
- Enkel te gebruiken met de meegeleverde FireStik NGP coaxkabel vanwege afgestemde resonantie
- Niet compatibel met standaard FireStik FS-antennes – resonantie en draad verschillen
- Bij kabelverlenging uitsluitend RG58 A/U gebruiken in lengtes van 275 cm (veelvouden)
- Na installatie afstemmen op laagste SWR is noodzakelijk voor optimale werking
Bestel de FireStik FG2DD-B No Ground Plane antenneset nu bij Deltron.nl en kies voor stabiele, storingsvrije CB-communicatie – ook zonder metalen massa!
Let op:
De Firestik FG-serie antennes lijken veel op de FS-serie antennes maar de FG-serie zijn anders gewonden en hebben een andere resonantiefreqeuntie. Daarom kun je de antennesprieten niet met elkaar verwisselen.
Verkrijgbare accessoires
- FST: Beschermtop verkrijgbaar in drie kleuren: zwart, rood en wit.
- TTK-2: Reparatiekit voor antenne-top
- K-8NGP: Vervangende coax kabel
Meer weten over Firestik?
Lees onze uitgebreide gids over Firestik antennes of bekijk het complete Firestik assortiment.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1866 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Game-Changer for My Space!
Color: White, Size: 4 Panel Basic
I recently purchased the Kecreque 4-Panel Room Divider, and it has completely transformed my living area. At 88" wide, it provides ample coverage, creating a private nook in my open-concept home. The white polyester fabric is not only sleek and modern but also wrinkle-resistant and easy to clean—just a quick wipe with a damp cloth, and it looks brand new.
Assembly was a breeze; I had it set up in about 20 minutes. The metal frame feels sturdy and durable, and the three extra-wide metal feet offer excellent stability, ensuring it doesn't tip over easily. I love how the panels are connected with flexible buckles, allowing me to adjust the configuration to suit my needs—be it a straight line or an angled setup.
This divider has been perfect for creating a dressing area in my bedroom, and I've also used it to section off a workspace in my living room. Its versatility is unmatched, and it folds down compactly when not in use, making storage hassle-free.
If you're looking for a stylish, functional, and easy-to-use room divider, I highly recommend this one. It's been a fantastic addition to my home!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2025