sunlu filadryer s1 plus
SKU: 30517837878

sunlu filadryer s1 plus

$44.10 $49.00
Save 10%
No.2 Bestseller on albidaaevents.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sunlu filadryer s1 plusSunlu FilaDryer S1 Plus Filament droogsysteem Beschrijving: Het Sunlu FilaDryer S1 Plus filament droogsysteem maakt snelle en gemakkelijke voorbereiding van 3D printfilamenten mogelijk. Of het nu PLA is of sterk hygroscopische materialen zoals BVOH en nylon dit apparaat kan elk type filament verwerken en garandeert daarmee een optimale printkwaliteit. Technische gegevens: Eigenschap Specificatie Ondersteunde filamentdiameters 1,75 mm, 2,85 mm, 3,00 mm

Sunlu FilaDryer S1 Plus – Filament-droogsysteem

Beschrijving: Het Sunlu FilaDryer S1 Plus filament-droogsysteem maakt snelle en gemakkelijke voorbereiding van 3D-printfilamenten mogelijk. Of het nu PLA is of sterk hygroscopische materialen zoals BVOH en nylon – dit apparaat kan elk type filament verwerken en garandeert daarmee een optimale printkwaliteit.

Technische gegevens:

Eigenschap Specificatie Ondersteunde filamentdiameters 1,75 mm, 2,85 mm, 3,00 mm Ondersteunde materialen PLA, ABS, HIPS, NYLON, BVOH, PETG, ASA, TPU, FLEX, PP en meer Bedrijfstemperatuur 35°C tot 55°C Voeding 24 V DC adapter inbegrepen Afmetingen 271 x 100 x 237 mm Gewicht 980 g LCD-schermgrootte 2" Timer met LCD-scherm Ja Filamenthouder Geïntegreerd, ondersteunt twee rollen tegelijk

Hoogtepunten:

  • Filament optimaal drogen: Zorgt voor de beste printresultaten door vocht uit het filament te verwijderen.
  • Precieze temperatuurregeling: Het apparaat maakt nauwkeurige controle van temperatuur en droogtijd mogelijk via een LCD-display.
  • Comfortabele filamenthouder: De FilaDryer S1 Plus dient ook als filamenthouder, van waaruit direct geprint kan worden.

Waarom u dit product zou moeten kopen: De Sunlu FilaDryer S1 Plus biedt een eenvoudige oplossing voor het drogen van diverse filamenttypes die vaak gevoelig zijn voor vocht. Dankzij de precieze regelmogelijkheden kunt u er zeker van zijn dat uw filament altijd optimaal is voorbereid. Het apparaat maakt het gebruik van meerdere printers tegelijk mogelijk en zorgt voor een soepel printproces zonder materiaalverstoppingen of vochtproblemen. Met zijn compacte ontwerp en lichte gewicht is het ideaal voor elke werkplaats of thuiswerk-omgeving.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 30517837878

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 1748 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Peter Schott
Grantham, US
★★★★★ 5
Use the best oil to protect your investment
Configuration: 4-Stroke, Size: 1 GA
Great product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
S
Verified Purchase
Steve M.
Belleville, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Dallas, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Cuba, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Belleville, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products

GB GORDINGLAS 96X246 SV 1,5
39.13
GB HOEKANKER ZWAAR 40X120 SV 70X6
95.98
GB GORDINGLAS 63X150 SV 1,5
31.75
GB HOEKANKER ZWAAR 60X100 TV 80X8
118.91
GB HOEKANKER ZWAAR 100X180 TV 70X8
79.93