Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SpeedyBee F405 V3 BLS 60A 30x30 StackDive into the future of drone flight control with the SpeedyBee F405 V3 Flight Controller, a masterpiece engineered for those who laugh in the face of gravity. Coupled with the robust SpeedyBee BLS 60A 4 in 1 ESC, this duo is like Batman and Robin for your drone unstoppable, reliable, and always ready for action. SpeedyBee F405 V3 Flight Controller The Brain of Your Drone MCU Power: At the heart is the STM32F405 MCU, flexing its computational muscles
Dive into the future of drone flight control with the SpeedyBee F405 V3 Flight Controller, a masterpiece engineered for those who laugh in the face of gravity. Coupled with the robust SpeedyBee BLS 60A 4-in-1 ESC, this duo is like Batman and Robin for your drone - unstoppable, reliable, and always ready for action.
SpeedyBee F405 V3 Flight Controller - The Brain of Your Drone
- MCU Power: At the heart is the STM32F405 MCU, flexing its computational muscles to keep your drone as stable as your life is adventurous.
- Precision Gyro: The BMI270 gyro is like having a Zen master onboard, ensuring silky smooth flights even when you're pushing the limits.
- Connectivity Galore: With Type-C USB, BLE Bluetooth for wireless configuration, and a barometer that knows which way is up, it's more connected than a conspiracy theorist on the internet.
- DJI Ready: Whether you're plugging in with a 6-pin connector or soldering directly, DJI devices like O3, RunCam Link, and others play nice without a fuss.
- Storage Savvy: A MicroSD card slot that's pickier about its cards than you are about your playlist, supporting up to 32GB but truly vibing with 4GB FAT32 formatted cards.
- Power Distribution: Speaks fluent electricity with 3S-6S Lipo support, distributing power through 5V, 9V, 3.3V, and even a special 4.5V output for your gadgets.
- Expansion Ready: With 6 UARTs, I2C support, and dedicated pads for LEDs and buzzers, it's like having a Swiss Army knife for your drone.
SpeedyBee BLS 60A 4-in-1 ESC - The Heartbeat of Your Propellers
- Unyielding Power: 60A continuous current per channel, with bursts up to 80A, because why settle for less?
- Firmware Genius: Running BLHeli_S firmware for that buttery-smooth throttle response, making your drone dance like it's on "So You Think You Can Fly?"
- DSHOT Ready: Supports DSHOT300/600 because analog signals are so 1999.
- Built Tough: Comes with a 1000uF low ESR capacitor in the box, because the only surprise we like is a birthday party.
- Size Matters: Compact yet powerful, measuring up with a 30.5 x 30.5mm mounting pattern, it's like fitting a rocket engine in your pocket.
What's in the Box?
- For the SpeedyBee F405 V3: Just the flight controller, ready to make your drone smarter than your smartphone.
- For the BLS 60A ESC: The ESC itself plus a 1000uF capacitor, because we're nice like that.
Upgrade your drone with the SpeedyBee F405 V3 Flight Controller and BLS 60A ESC combo, and experience flying that's as exhilarating as scrolling through memes at 3 AM. Your drone deserves the best; give it the brain and the brawn it needs to soar above the rest.
Specifications
| Product Name | SpeedyBee F405 V3 30x30 Flight Controller |
| MCU | STM32F405 |
| IMU(Gyro) | BMI270 |
| USB Port Type | Type-C |
| Barometer | Built-in |
| OSD Chip | AT7456E chip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4) |
| WIFI | Not supported |
| DJI Air Unit Connection Way | Two ways supported: 6-pin connector or direct soldering. |
| 6-pin DJI Air Unit Plug | Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed. |
| Blackbox MicroSD Card Slot | *Betaflight firmware requires the type of the microSD card to be either Standard (SDSC) or High capacity (SDHC), so extended capacity cards (SDXC) are not supported(Many high-speed U3 cards are SDXC). Also the card MUST be formatted with the FAT16 or FAT32 (recommended) filesystems. So, you could use any SD card less than 32GB, but the Betaflight can only recognize 4GB maximum. We suggest you use this 3rd party formatting tool and choose 'Overwrite format' then format your card. Also check out here for the recommended SD cards or buy the tested cards from our store. |
| BetaFlight Camera Control Pad | Yes(CC pad on the front side) |
| Current Sensor Input | Supported. For SpeedyBee BLS 60A ESC, please set scale = 400 and Offset = 0. |
| Power Input | 3S - 6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side) |
| 5V Output | 9 groups of 5V output, four +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 4x LED 5V pads. The total current load is 2A. |
| 9V Output | 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 2A. |
| 3.3V Output | Supported. Designed for 3.3V-input receivers. Up to 500mA current load. |
| 4.5V Output | Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. |
| ESC Signal | M1 - M4 on bottom side and M5-M8 on front side. |
| UART | 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6 |
| ESC Telemetry | UART R5 |
| I2C | Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. |
| Traditional Betaflight LED Pad | Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware. |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button |
Supported.
[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware. |
| RSSI Input | Supported. Named as RS on the front side. |
| Smart Port / F.Port | Not supported |
| Supported Flight Controller Firmware | BetaFlight(Default), INAV (INAV firmware can only use Multishot (recommended) and OneShot125. Please note that DShot is not supported.) |
| Firmware Target Name | SPEEDYBEEF405V3 |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 41.6(L) x 39.4(W) x 7.8(H)mm |
| Weight | 9.6g |
| Product Name | SpeedyBee BLS 60A 30x30 4-in-1 ESC |
| Firmware | BLHeli_S J-H-50 |
| PC Configurator Download Link | https://esc-configurator.com/ |
| Continuous Current | 60A * 4 |
| Burst Current | 80A(10 sec) |
| TVS Protective diode | Yes |
| External Capacitor | 1000uF Low ESR Capacitor(In the package) |
| ESC Protocol | DSHOT300/600 |
| Power Input | 3-6S LiPo |
| Power Output | VBAT |
| Current Sensor | Support (Scale=400 Offset=0) |
| ESC Telemetry | Not supported |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 45.6(L) * 44(W) *8mm(H) |
| Weight | 23.5g |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 257 reviews
Sort
Product Reviews
★★★★★ 5
Impressing for a suit !!!!
Color: Black, Size: 12 Years
Wonderful fit and quality ! Very impressed and true to size . Purchased for a school play but now I know I can use for major events !!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 5
Royal Blue Suit
Color: Royal Blue, Size: 10 Years, Color: Royal Blue, Size: 10 Years
Love the color, the material was good, fix was excellent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
★★★★★ 5
Let's Go!
Color: Royal Blue, Size: 16 Years, Color: Royal Blue, Size: 16 Years
Very happy. Fit much better than I expected.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 5
Perfect Suit Great Quality and Value
Color: Lavender Purple, Size: 6 Years, Color: Lavender Purple, Size: 6 Years
I love at how nice this boys suit turned out. The slim fit gives it a stylish, elegant look, and it makes my nephew look so sharp and grown up. Fit true to size.
The material feels good quality, not thin or cheap, and it’s definitely nicer than I expected for the price. I really like that it comes as a full set, which made things so much easier instead of having to buy down extra pieces. Love the tie and the vest, so cute.
He wore it for a special event and got so many compliments, people couldn’t believe how handsome he looked. It stayed looking neat all day, and he was able to move around comfortably. I could easily see him wearing this again for weddings, church, holidays, or even school pictures.
Overall, it’s a great buy if you want your little guy to look dressed up without spending a fortune. Beautiful boys suit, stylish and elegant, great value and quality. Wash inside out, and air dry.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 26, 2025
★★★★★ 5
One of the best suits out there!!
Color: Christmas Green, Size: 8 Years
I am not one who write reviews, so the fact that I'm penning this review you should know. These suits are the best, the sizing, the fit, the quality everything is perfect. I bought for my 3 sons and they all fit well, I was worried about the fit because one of my son is slender but tall so length things would be okay but waist toooo big, with this suit everything was on point. Ages: 13-14(about 5"4-5"5 have a little body wouldn't consider husky) got him size 18,
10-11(slender but a little tall for his age) got him size 14,
9yr old(average height and body size) got him size 8. Can't beat the price and for 6 pieces(pants, vest, jacket, shirt, tie, bowtie)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
recommand products
XClutch 07-18 Toyota Landcruiser Base 4.5L Stage 1 Extra HD Sprung Organic Clutch Kit
646.47
ACL Nissan RB26DETT Standard Size High Performance Main Bearing Set - CT-1 Coated
185.88
XClutch 16-18 Toyota Hilux Base 2.4L Stage 2 Sprung Ceramic Clutch Kit
480.29
ACL Acura B17A1/B18A1/B18B1 / B18C1/B18C5 VTEC / Honda K20A3/K20A2/K24A 0.25mm Oversized High Perfor
111.10
ACL To be superceded by 4M2037A when stock exhausted. Engine Crankshaft Main Bearing Set
23.17