SKU: 8030362513

Greenfingers Grow Tent 2000W LED Grow Light 120X120X200cm Mylar 6" Ventilation

$348.75 $387.50
Save 10%
No.2 Bestseller on albidaaevents.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Greenfingers Grow Tent 2000W LED Grow Light 120X120X200cm Mylar 6" VentilationNeed to keep your precious flora and vegetation growing healthy in every season? Our Green Fingers LED Grow Light is the perfect solution. Our grow light is designed to stimulate plant growth by emitting a light appropriate for photosynthesis where there is either no naturally occurring light, or where supplemental light is required. It provides a light spectrum similar to that of the sun and outdoor conditions are mimicked with varying colour,

Need to keep your precious flora and vegetation growing healthy in every season? Our Green Fingers LED Grow Light is the perfect solution. Our grow light is designed to stimulate plant growth by emitting a light appropriate for photosynthesis where there is either no naturally occurring light, or where supplemental light is required. It provides a light spectrum similar to that of the sun and outdoor conditions are mimicked with varying colour, temperatures and spectral outputs from the grow light, as well as varying the lumen output (intensity) of the lamps.

With LEDs, there is a cost savings of up to 70% for the most effective produce per watt. Both ballast and reflector are built-in for certain models, and an advanced thermal system keeps the ensemble cool at all times. Plus, the full spectrum control also provides plants and flowers everything they desire in natural sunlight. Not least, the grow light is engineered to keep the balance with high PAR and suitable coverage so that light is spread out and not concentrated at the center to prevent sunburn. With a lifespan of up to 100,000hours, the LED grow light is guaranteed to give you higher yields and better harvest time and again.

As a perfect accessory to the grow light, our Grow Tent is designed to ensure optimum utilization of the grow light to maximise yields. The powder-coated steel frame and highly durable interior and interior fabric construction all adds to its long-lasting functionality.

Other useful add-ons include a powerful ventilation fan and efficient active carbon filter and a long 5m ducting to facilitate hassle-free installation.

Note: LEDS are extremely bright when working. Do not look directly into them.

Features
Grow Tent
Strong steel construction
Heavy-duty corner connectors
Easy install, no tools needed
Spacious interior
600D oxford cloth exterior
Aluminium foil inner lining
Removable water-proof floor tray
Heavy-duty support bar for lights and fans
Zippered doors and zippered windows
One cooling air tube
Two air extraction openings
Two power cord ports
Three ventilation windows
LED grow light 2000W
High PAR value
For all stages of plant growth
Intelligent Epistar LED chip
Up to 70% costs savings
Advanced thermal management system
Life expectancy 50,000hrs to 100,000hrs
Indoor use
Standard Australian plug
RCM, SAA, CE, RoHS certified
6" Ventilation Fan
CE certificate
High impact polycarbonate blade
AU standard plug
Powerful and efficient performance
Lightweight and practical.
Noiseless and power saving
6" Active Carbon Filter
Recommended filter flow: 290~500m3/h
50mm RC-48 Australian virgin carbon bed
Vibra machine packed carbon
Customized open air stainless steel mesh
Anti-air-bypass technology
5m Aluminium Ducting
Standard 5 meters length, compressed to 0.4-0.6 meter
Individually boxed
Easy to connect to either round or oval ducting
No special tools required for cutting or fixing
Fire-resistant
Heavy-duty and flexible dual layer Aluminium foil

Specifications:
Grow Tent
Frame: Powder coated steel
Exterior fabric: 600D Oxford cloth
Interior fabric: 600D Diamond texture
Inner lining: Aluminium foil
Overall dimensions: 120cm x 120cm x 200cm
Colour: Black and Green
Assembly required: Yes
Number of packages: 1
Grow Light
LED Quantities: 198pcs 10W LEDs
Avg. Power Draw: 400watt±5％
Perfect for 4ft x 4ft vegetative coverage at 24" height
Perfect for 3.5ft x 3.5ft flowering coverage at 18" height
LEDs Angle: 90°
Input Voltage: AC100-240V
Frequency: 50-60Hz
Lifespan: 100,000 hours
Replaces a 1000watt HPS/MH
Spectrum: 450-470nm,620-630nm,650-670nm,UV400-410,IR730,6000k,3000k
6" Ventilation Fan
Current: 0.2A
Power: 32W
Speed: 2500rpm
Air flow: 350m3/H
Noise: 34fb (A)
6" Carbon Filter
Material: Stainless steel
Weight: 3.2kg /5.5kg
Ducting
Length: 5m
Material: Dual-layer aluminium foil
Assembly required: Yes
Number of packages: 3

Package Content
1 x Greenfingers LED Grow Light
1 x Greenfingers Grow Tent
1 x Ventilation Kit
1 x Assembly Instructions

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 8030362513

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 770 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
PowerTripp
Fort Morgan, US
★★★★★ 4
The most legit banana plugs I could find on Amazon
Size: 6 Pairs / 12 pcs, Size: 6 Pairs / 12 pcs
NEW PREFACE:: I am kind of glad I first bought the horribly magnetic, horribly made and GOLD PAINTED Sewell crimp on plugs (some reviewers say that Sewell are better and easier to use than the FosPower, which is true in design, but in quality of materials FosPower beats them hands down!!) ... Changing from those to these FosPower plugs plus the Monoprice 90° plugs, I am flabbergasted at the difference they make in sound quality. I have heard people say that they can hear the difference and even as an audiophile I was skeptical..... but my skepticism has been completely erased by what I am hearing with my own ears. I waited a few days to make sure I wasn’t just tripping before updating this review 🤣....but it has become clear to me how much a difference plugs made from the right materials actually make!!! I am 100% serious that the bass coming out of my Polk Signature Series tower speakers has at least doubled at the same volume. I can also now turn the volume up Way past my max volume before, without any distortion and much more clarity and less harsh highs. Everything just sounds warmer in general now which is amazing!!!! This is dangerous info for me... because now I’m thinking about making some really nice custom wires to see how much of a difference that makes 🙄🙄🤣 OK onto the review of the actual plugs here~~ These seem like decent connectors. I can’t tell if they are brass or copper, but they only have a slight hint of a magnetic property when testing them with a very powerful magnet. I was easily able to fit x2 - 14ga wires into it for bi-wiring purposes, including screwing on the collar. (As seen in my example pic) The gold plating on the tips seems legit and not painted like some of the plugs from Sewell... I have tested and tried quite a few plugs from Amazon and most seem to be crap. These however hold up better than most! These and the Monoprice 90° banana plugs with the black and red rubber sleeves. The latter are gold plated copper and have zero magnetic properties. (if you need 90° banana plugs) UPDATE: still the best plugs I have found, but upon full install found two issues. One is a defect where a set of the plug threads for the barrel cover body weren’t cut right. The body’s do not tighten and stay loose because of that. Obvious issue for vibration with metal on metal... The other issue is that even though these say they can fit different gauge wires, they seem to be geared more towards 12 or 10 gauge. I am using semi solid strand 14 gauge and find that unless I fold the wire over to make it double thick, the bolts use up all the thread and seem to become kind of loose inside the body. They won’t fully seat and keep spinning no matter how much you tighten. They seem to stay secure still but I just wonder about longevity over time with vibrations. So I just doubled up the wire and they seated fine! Not the worst issue in the world, but just kind of a pain since you have to strip the wire longer than you normally would so you can fold it over. ANOTHER UPDATE: I had to remove these plugs from the wire to connect them to a crappy spring terminal amp while my better amp was in the shop. The issue I wrote about with the set screws "bottoming out" on smaller gauge wire became a more pronounced issue! I could not unscrew the set screws anymore and just had to cut the wires... So that means I will need to purchase more of these to replace the ones I cannot get wire back into. Not the best design, but still one of the best plugs I have found on Amazon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2021
R
Verified Purchase
Russell B
Charlottesville, US
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
E
Verified Purchase
Ed Train
Bozeman, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
Birmingham, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
Waukegan, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025

recommand products

David Beckham Classic Blue Eau De Toilette For Him - Men'S Fragrance, Fragrance, Citrusy, Woody Scent - 1.6Oz
25.52
Tape In Hair Extensions Human Hair 100% Real Remy Human Hair 100G 40Pcs/Set Brazilian Virgin Hair Body Wave Tape Ins For Black W
102.27
Fishdown Rainbow Headband, 8 Pcs Glitter Headbands For Girls, Sequin Headbands For Girls With Heart Design, Hair Accessories For
13.91
Satin Bonnet Silk Bonnet For Sleeping, Double Layer Large Hair Bonnets For Women Men Natural Curly Hair Shower Cap
10.11
Travertine Spa Steam Shower Spray, Eucalyptus And Lavender, 2 Oz.
35.44