Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Rear Wheel Bearing Kit for Toyota Camry II 2.4i Xli (Left) - PQ1012Vehicle Fitment & Part Details This rear wheel bearing kit is listed for the Toyota Camry II 2. 4i Xli (01 06). The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU PQ1012 Component Rear Wheel Bearing Kit Position Rear (Left) Configuration Kit (covers one wheel) Primary Fitment Toyota Camry II 2. 4i Xli (01 06) Dimensions 74 mm outer diameter, 74. 5 mm
Vehicle Fitment & Part Details
This rear wheel bearing kit is listed for the Toyota Camry II 2.4i Xli (01-06). The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- PQ1012
- Component
- Rear Wheel Bearing Kit
- Position
- Rear (Left)
- Configuration
- Kit (covers one wheel)
- Primary Fitment
- Toyota Camry II 2.4i Xli (01-06)
- Dimensions
- 74 mm outer diameter, 74.5 mm height
- OEM References
- 4246048011, 4246006010, 4246006040, 4246006011, 4246006060, 4246006020, 4246048010, 4246006021, 4246006030
Product Specifications
| Specification | Value |
|---|---|
| Outer Diameter | 74 mm |
| Height | 74.5 mm |
| Flange Diameter | 152 mm |
| Disc Diameter / Gear Teeth | 60 mm |
| Bolt Pattern (PCD) | 5X114 |
| Mounting Holes | 4 |
| Wheel Studs | 5 |
Vehicle Fitment
Includes 1 supplied application covering Toyota. Use the full table below to confirm model, engine option and year range before ordering.
| Make | Model / Application | Year Range |
|---|---|---|
| Toyota | Camry II 2.4i Xli, 3.0 GLX 1MZ-FE | 01-06 |
Fitment Notes
- Always match the listed vehicle details before ordering. Verify VIN/engine.
- Open-ended dates (e.g. "2002-") reflect supplier catalogue data and must be confirmed against the vehicle before ordering.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, OE reference and original part comparison before ordering.
- Confirm your ABS type (ABS / non-ABS / ASB / encoder ring) before ordering - the wrong ABS variant will not function correctly.
- Match the supplied dimensions to your original bearing: 74 mm outer diameter, 74.5 mm height.
- This part is for the Left side. Order the correct side (or both) for your repair.
- This kit covers one wheel; order two for a full axle.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this rear wheel bearing kit fit my Toyota?
This part (PQ1012) is listed for the fitments shown on this page. Confirm by matching the fitment details and your original part. Verify VIN/engine.
Does this cover one wheel or both?
This kit covers one wheel. Order two if you are replacing both sides of the axle.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 324 reviews
Sort
Product Reviews
★★★★★ 5
Really Cool
This is actually a well made portafilter. It was such a good idea to be able to have a nice WDT tool built in that doesn’t take up some extra counter space or anything. It minimizes clutter and just was a good idea so you always have it handy. Definitely would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 18, 2024
★★★★★ 3
Fine basket, lousy magnets: Look elsewhere
Build is nice, solid and the baskets fit snuggly without being too hard to remove. The WDT tool works well and came with a surfeit of needles.
HOWEVER
The tiny magnets holding the WDT in the handle aren’t glued in place and now come FLYING out when the tool is removed. One or two pull free and then shoot across the unit, pulling others out and ending up somewhere in the kitchen. Fortunately (because they’re REALLY small), they form a small column making it somewhat easier to track down. But it’s such a nuisance I now leave the tool out, so there’s a small dangerous hedgehog of verrrry thin needles in my kitchen we need to work around. Sub-optimal, sorta defeats the purpose of in-handle tool.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
★★★★★ 5
Excellent product!
It’s all good
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 27, 2025
★★★★★ 5
Unlock your machine's potential
***Twist the WDT tool to remove dont try to just pull, or use your finger nails A slight twist will break the magnetic bond and the tool just comes out of the handle***
i got this to get away chemicals, hot acidic coffee possibly leaching plastic and aluminum that the stock portifilter is made from. This seems like a nice stainless by the looks and heft of it. Aluminium is bad for the brain and plastic is just bad.
Function... Im not using a 200$ or more grinder or anything... Just fresh beans and a 30$ wancle amazon burr grinder and this is pulling beautiful bottomless shots that really helped me dial in better and see my channeling issues that intern lets me adjust and get better.
The stock tapered basket prevents consistant tamps and keeps you from using off the shelf filter papers at the bottom of the basket.
i have to use a gram or 2 more for my dose but that just means stronger drinks. I can tell visually im getting more extraction now that im dialed in by the color after adding milk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026
★★★★★ 1
It doesn’t even fit
It doesn’t fit our Breville Barista Pro because the portafilter head is too tall. Such a disappointment.
Update: Absolutely horrible customer support as well. Their only attempt to rectify the situation was by double checking their own portafilter they have and confirming it works. It’s equivalent of “we investigated ourselves and found nothing wrong.” No replacements, no willingness to accept constructive criticism in order to change the dimensions slightly by decreasing the height of the portafilter head by even a millimeter to make it work, nothing. Just a slap in the face telling me to return it and be gone. Avoid this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 4, 2025
recommand products
MFactory Close Ratio Gears 1.700 3rd Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 4th Gear
277.43
MFactory Close Ratio Gears 3.420 1st 2.360 2nd 1.800 3rd 1.470 4th and 1.210 5th Peugeot 106 206 Gti
1179.16
MFactory Close Ratio Gears Dual Carbon Synchro 3rd 4th + Single 5th Honda Accord H22A F20B
121.50
MFactory Helical LSD Differential BMW M5 E34 MT 88-94
640.25
K-Swap Fullsize Radiator (94-01 Acura Integra w/ K-Swap)
371.00