EZ Flate - Air Boost Pro
SKU: 75941009975

EZ Flate - Air Boost Pro

$179.99 $199.99
Save 10%
No.2 Bestseller on albidaaevents.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

EZ Flate - Air Boost ProAir Boost Pro is the ultimate all in one tool. This air compressor jump pack combo is the perfect backup tool for any situation. Easily inflate tires on bikes, motorcycles, ATVs, SXS's, and even car or off road tires in an emergency situation. The Air Boost compressor is equipped with our Auto Air technology that will automatically shut off at your target PSI. Quickly jump start everything from dirt bikes to heavy duty diesel trucks using its 12V

Air Boost Pro is the ultimate all-in-one tool. This air compressor/jump pack combo is the perfect backup tool for any situation.

Easily inflate tires on bikes, motorcycles, ATVs, SXS's, and even car or off-road tires in an emergency situation. The Air Boost compressor is equipped with our Auto Air technology that will automatically shut off at your target PSI. Quickly jump-start everything from dirt bikes to heavy-duty diesel trucks using its 12V alligator clamps or battery-to-SAE adapter. Includes built-in LED emergency lights to keep you safe and seen on the side of the road. 

Air Boost Pro:

  • Easily inflates tires on bikes, motorcycles, ATV’s, SXS’s, etc.
  • Jumpstarts dirt bikes and motorcycles with battery-to-SAE adapter
  • Inflates a car tire in less than 5 minutes
  • Automatically inflates to your target PSI with Auto Air Technology
  • Jumpstarts any gas vehicles, and up to a heavy-duty diesel
  • Attaches to any 12V vehicle battery
  • Multiple LED emergency light selections
  • 14800 mAh
  • 1.6 CFM
  • Peak Current: 1800A
  • Weight: 2.43 lbs
  • Size: 6.06 in x 5.21 in x 2.06 in
  • 3 Year Limited Warranty

Deciding between Air Boost and Air Boost Pro? We’ll make it easy—our Pro version has a 50% longer battery life, an 80% faster compressor, and can jump-start heavy-duty diesels. And if size or cost are a bigger concern and you don’t have a heavy-duty diesel, get the Air Boost, and we’re sure you’ll be impressed!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 75941009975

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1616 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Peter Schott
Charlottesville, US
★★★★★ 5
Use the best oil to protect your investment
Configuration: 4-Stroke, Size: 1 GA
Great product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
S
Verified Purchase
Steve M.
Dallas, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Carnegie, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Whiting, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Chelsea, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products

Valspar Zone Yellow Latex Marking Paint (1-Gallon)
38.98
FurnitureR Desk Chair Armless Cute Home Office Desk Chair for Kids, Swivel Computer Task Chair Study Chair with Mesh Padded Cushion and Rolling Wheels for Child, Pink
57.95
Rust-Oleum Stops Rust Custom Spray 5-in-1 6-Pack Satin Heritage Red Spray Paint (NET WT. 12-oz)
58.97
DELUXE BLACK SERIES BILLET POWER WINDOW SWITCH-DOT-WHITE
86.00
Armless Office Chair with Wheels Wide Desk Chair Leather Mid Back Accent Chair Padded Swivel Vanity Chair for Girl Women Computer Task Chair for Home Office (Leather, Black)
103.99