Kit Stator + Pickup Suzuki RM125 / RM250 '94-'01 (RM22843)

Kit Stator + Pickup Suzuki RM125 / RM250 '94-'01 (RM22843)You must re install your original connector and grommet (see picture) Once your connector and grommet is re installed, our part becomes a plug and play unit, direct fit, and very easy to install Pickup pulsar coil included (separate) Higher grade of electric components Highest grade of copper winding, resistant to 200 degrees Celsius All shipped products are tested All item pictures are accurate; if in doubt, do not hesitate to compare our item to

• You must re-install your original connector and grommet (see picture)
• Once your connector and grommet is re-installed, our part becomes a plug-and-play unit, direct fit, and very easy to install
• Pickup pulsar coil included (separate)
• Higher grade of electric components
• Highest grade of copper winding, resistant to 200 degrees Celsius
• All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Dimensions Stator:

Physical Dimensions:

• Interior diameter: 28mm
• Exterior diameter: 57mm
• Thickness: 15mm
• Length of wires stator to terminals: 600mm

Other specifications:

• Number of wires: 4
• Number of plugs: 0
• Number of terminals: 4

Wire to wire resistance:

• Source 1 : Red to White = 28 ohms +/-20%
• Source 2 : Yellow to Yellow = 0.4 ohms +/- 20%

Dimensions Pickup Pulsar Coil:

Physical Dimensions:

• Height: 25mm
• Length: 22mm
• Width: 18mm
• Bracket centre to centre: 35mm
• Wires length: 90mm

Other Specifications:

• Number of wires: 2
• Number of pins: 2

Wire-to-Wire Resistance:

• Pink/Red to White = 100 ohms +/- 20%