Polymaker PolyDissolve S1 PVA 1.75mm Filament 750g
SKU: 65037476435

Polymaker PolyDissolve S1 PVA 1.75mm Filament 750g

$87.26 $96.95
Save 10%
No.2 Bestseller on albidaaevents.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Polymaker PolyDissolve S1 PVA 1.75mm Filament 750gPolyDissolve S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility. We recommend that this material be used with the PolyBox to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results. Features Complex Geometry PolyDissolve S1 is a

PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility. 

We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.

Features

  • Complex Geometry - PolyDissolve™ S1 is a preferable solution when printing complex geometries, overhangs, internal cavities and complicated structures. It liberates you from support removal problems, and enables greater design freedom.
  • Wide material support - PolyDissolve™ S1 is engineered to have a good adhesion and perfect interface with a variety of supported materials from Polymaker including Nylon, PLA, TPU and PVB.
  • Water Soluble - Optimized to dissolve in water, supports printed in PolyDissolve™ S1 will dissolve in tap water. Safe and easily accessible!  
  • Improved surface quality - Greatly improve the surface quality where supports interface with your prints when using PolyDissolve™ S1.
  • Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.

Printing Settings

Storage & Drying

Before packaging, PolyDissolve™ S1 is dried to ensure the best printing quality and filaments are vacuum sealed to protect the filament from moisture. When not in use PolyDissolve™ S1 should be stored away from sunlight in the packaged resealable bag.

PVA is hygroscopic so it is highly recommended to store PolyDissolve™ S1 in the PolyBox™ or dry cabinet during printing to prevent moisture absorption which will lower the quality of the print. The PolyBox™ keeps the filament at dry conditions (relative humidity of 15% or less). 

If you hear popping sounds and notice that the surface quality of your print is uneven or the color is not consistent, this is a likely indicator that the filament has absorbed too much moisture. Spools of PolyDissolve™ S1 can be dried in a preheated convection oven at 80˚C for up to 12 hours. Results may vary depending on the accuracy of your oven so please be conservative. For more information about filament drying please read our user guide.

Material Compatibilities

  • PLA based material from Polymaker’s portfolio + +
  • PETG based material from Polymaker’s portfolio +
  • ABS based material from Polymaker’s portfolio – –
  • PC based material from Polymaker’s portfolio – –
  • PVB based material from Polymaker’s portfolio + +
  • TPU based material from Polymaker’s portfolio + +
  • Nylon based material from Polymaker’s portfolio + +

+ + supports the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Compatibility

PolyDissolve™ S1 has been engineered with compatibility in mind to interface perfectly with Polymaker PLA, PVB, TPU and Nylon filaments and to print excellently on a wide range of professional 3D printers.

To print multi-material soluble supports, a dual extrusion 3D printer capable of printing both the modeling and support material at different temperatures is required. (i.e left nozzle at 200˚C and right nozzle at 215˚C).

Of course with thousands of unique 3d printer models on the market, we can't guarantee each filament type will work with every 3D printer.

Browse More 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 65037476435

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1649 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
David
Waukegan, US
★★★★★ 5
Exceeded expectations in every way.
Size: 2' x 3' (Sheepskin shape), Color: Gray Tip, Size: 2' x 3' (Sheepskin shape), Color: Gray Tip
I purchased a pair of these a week apart, because the price seemed too good to be true. Instead, they have exceeded my expectations. I own a Buick with leather seats that look incredible, but are not comfortable on long trips, and my wife and I were preparing to leave on a 2200 mile round trip vacation. On the first day, we drove 700 miles, much of it through desert. We were tired when we reached our destination, but comfortable and cool for every mile of it. The sheepskins have made such a difference, that I have never removed them from the car. It is now July, with triple digit temperatures every day, surrounded by desert. The sheepskin keep us cool on every drive. I could have purchased sheepskin seat covers, but these provide the same comfort for a fraction of the cost. Yes, it takes a small amount of effort to adjust them when you first get into the car, but I don't even think about it any more. As far as the quality, there is no shedding, no smell, and no discoloration. We have put over 4,000 miles on the car since I put these in, and I have no complaints to register.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2025
C
Verified Purchase
Courtney Harris
San Leandro, US
★★★★★ 5
Just buy it!
Color: Grey, Size: 74"x60"
I'm always cold and wanted a blanky, a goto cuddly blanket! I bought this with the intentions of turning it into a duvet for my heating blanket. Now, I haven't bought a blanket in over 20yrs and then it was just some down comforters where I updated the duvets over the years but that's it. So I started shopping and picked my top 5 faux fur blankets based on fiber density (where available), color, and customer reviews. I was willing to pay as long as I got that goto blanky, I didnt want to be left underwhelmed, especially the more I have to spend. As a blanket newbie I got stuck and couldn't decide, so it came down to customer reviews and price point. There is $600 brand of blanket which im.sure is lovely but I will never know, just crossed them off my list, couldn't justify it, leaving this as the next most expensive on my list. So, I asked myself, do you really get what you pay for? Or all these blankets made by the same company, basically the same with different price tags? After reading EVERY SINGLE REVIEW ON ALL 5 BLANKETS and some others I had crossed out because I'm so terrified of buyers remorse, THIS BLANKET HAS THE FEWEST NEGATIVE COMMENTS OF ANY BLANKET!!! That being said theres a lot of postive comments out there but what if the other blankets positive comments are just from people who've never experienced a REALLY NICE BLANKY??? So I went with highest price point willing to spend (under $300ish) and fewest negative comments from people who sounded like they knew blankets, pics and videos people uploaded, etc. I let go and turned it over to the universe... If you're on the fence because it is pricey, JUST GET IT! It's freaking nice, like REALLY NICE! It's as if not more comfy than my 20 year old ralph Lauren duvet which I spent way more on than this. THIS BLANKET IS AMAZING and IT DOESNT SHED! 1. I'm not a trapper or a tanner but it looks real af to me. Real enough... 2. The fur is long, soft and fluffy! It's like your friends shaggy dog you want to love and squeeze but you know he hasn't been brushed and can smell him when you walked in the door. It's like that but only positive, I never want to leave it , pet it like dog, it's becoming my best friend, and I don't have to walk it! Even the inside is soft! It's like husky on th outside and rabbit on the inside!!! 3. It's warm and It's got some weight to it! Definitely not a cheap throw!!!!! Remember I was gonna use this as a duvet cover for my electric blanket??? Under this alone I sweat! Several times a night i wake up and throw it off me, my electric blanket doesn't even make me sweat and which is why I thought I could use cover for it.... WRONG! This blanket was all i needed! I've already probably said too much, but this Is the first review I've ever written. All I can say is if you're undecided; JUST GET THIS DANG BLANKET, SERIOUSLY! One more thing, to tell the world how crazy my fear of buyers remorse is a week or so ago, my number 3 blanket, leedy much cheper than this, was on ridiculously low sale so I had to buy it too see I you get what you pay for??? And YOU DO! Granted, It's a really nice blanket, and I probably would have been fine with it, HAVING NEVER SEEN THIS BLANKET.... The other blanket soft, shorter hair, looks real enough, sheds a bit so I brush it, but compared to this blanket, well you can't! It's like comparing a howrd Johnson or days inn to the ritz-carlton, or tube hamburger and a filet, one of these blankets you might consider cutting up for a kids costume and the other you definitely would not and its not just because of the price differnce, but in this instance, you do get what you pay for! The other blanket is not like us, hahaha If you made it this far I hope this helps you, good luck, and I'm telling you...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2025
J
Verified Purchase
Jennifer Gutkosky
Draper, US
★★★★★ 5
Buy this while it’s priced so low.
Color: Brown, Size: 74"x60"
I am a collector of furry blankets and this one is my new favorite. It’s heavy, and really warm. It’s also a beautiful blanket with the hair tones differently than I’ve seen before. Thank you for the high quality and a relatively lower price than other of close to the same value. It’s so soft and beautiful I had to buy another one!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
A
Verified Purchase
Amber
Battle Creek, US
★★★★★ 5
Luxury blanket it's everything I expected it to be
This is a nice soft smooth blanket it feels almost like a real animal it's not super heavy but it's a good weight it has a dense short hair best for someone who doesn't want a super furry blanket it's very affordable for the quality it's very warm its shiny in the light I love it I haven't washed it but im sure it would wash easily. it seems durable doesn't feel cheap treat yourself to luxury and get this blanket
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2025
R
Verified Purchase
Rayquan Palmer
Dallas, US
★★★★★ 4
Look extremely good and very good quality feel.
Color: Brown, Size: 74"x90"
Very warm and comfortable. Moreover, feel great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2025

recommand products

Scrunchies Hair Ties for Women Big Silk Satin Scrunchie Large Oversized Ligas Para el Cabello De Mujer Decorations Cute Jumbo Co
13.91
Ready to Sail
46.80
White Blossoms
52.40
Hair Washing Neck Rest Cushion, PVC Salon Spa Beauty Backwash Pillow Shampoo Bowl Suction Equipment Unit Pillow
20.09
Rhythm and Color II
52.40