1967-69 Mustang F3 Medium Duty Front Race Brakes 5 on 4.50

1967-69 Mustang F3 Medium Duty Front Race Brakes 5 on 4.501967 69 Mustang Disc and Drum F3 Medium Duty Front Race Brakes 5 on 4. 50 Medium Duty Drag Racing brake kits are the latest release from TBM brakes in its drag racing line. These brakes are the perfect balance of lightweight brakes with incredible stopping power that are up to the task of stopping heavier cars as well as high demand high heat applications such as stock super stock and bracket racing vehicles that do not tend to use a parachute and

1967-69 Mustang Disc and Drum F3 Medium Duty Front Race Brakes 5 on 4.50

Medium Duty Drag Racing brake kits are the latest release from TBM brakes in its drag racing line. These brakes are the perfect balance of lightweight brakes with incredible stopping power that are up to the task of stopping heavier cars as well as high demand/high heat applications such as stock/super stock and bracket racing vehicles that do not tend to use a parachute and utilize the brakes more than a typical heads up car or vehicle that uses the parachute every pass. Thanks to a .350" thick Revolution rotor and F3 4 piston no drag technology caliper, these brakes are up to the task for the most extreme uses in drag racing!

TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.

Included in this kit:

• F3 4 piston calipers 002-0056SSP-1 / 002-0056SSP-2
• #1 compound standard track pads 6-0102W 
• 10.75 x .350" steel revolution rotors 3-1075345525
• Caliper mounting brackets  17-0081-1 / 17-0081-2
• 5x4.50 Billet Aluminum Hub 008-107A
  
• 1/2 -20” wheel studs
• Mounting Hardware Kit 011-0352
• Kit weight: TBD

 This kit fits:

• 1967-69 Drum and Disc Spindle Mustang

*Does not fit 64-66 6 cylinder drum spindles*

F3 Caliper: This is the strongest 4 piston drag racing caliper available. A stronger caliper provides higher clamping force and less distortion so that your pedal force and pressure translates to better braking and less flex. Our unique no drag design means the pistons retract around .020 when you let off the pedal to insure no drag which improves ET / chassis performance and results in longer pad life

Please use red loctite on all rotor bolts

**Brake Lines NOT Included**

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.