CM1A - Schauer 6/12V 1A Fully Automatic Charger / Maintainer / Conditioner 115VAC Clips & Ring Terminals

CM1A - Schauer 6/12V 1A Fully Automatic Charger / Maintainer / Conditioner 115VAC Clips & Ring TerminalsModel CM1A (0757 13CEC) Schauer Charge Master Fully Automatic 6V 12V, 1 Amp Battery Charger Maintainer with Battery Clips and Ring Terminals. This Fully Automatic charger is for any type lead acid battery, including conventional flooded cell, maintenance free, deep cycle, gelled electrolyte, or AGM valve regulated batteries. 2 Stage Charge Control provides Modified Constant Current Charge to a finish voltage of 7. 2V (6 volt batteries) or 14. 4V (12

Model CM1A (0757-13CEC)

Schauer Charge Master Fully Automatic 6V/12V, 1 Amp Battery Charger/Maintainer with Battery Clips and Ring Terminals. This Fully Automatic charger is for any type lead acid battery, including conventional flooded cell, maintenance free, deep cycle, gelled-electrolyte, or AGM valve regulated batteries.

2-Stage Charge Control provides Modified Constant Current Charge to a finish voltage of 7.2V (6 volt batteries) or 14.4V (12 volt batteries), then switches to a Maintenance/Float voltage to maintain battery in fully charged condition. Charger may be left connected to battery indefinitely, without danger of overcharging.

Features

• For any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, AGM, & valve regulated batteries.
• Excellent for keeping batteries charged in stored vehicles - ideal for cars, motorcycles, riding mowers, snow machines, etc.
• Fully automatic, can be left on the battery indefinitely
• Charges, maintains, and conditions batteries
• Overload protection.
• Reverse polarity protection (Requires minimum of 5 volts from battery to start charger)

Specifications

• AC Input: 100-120VAC 50/60Hz
• DC Output: 1A at 6/12VDC
• AC Cord: N/A - Molded plastic case plugs into outlet
• DC Lead: 12 ft total length - 10 ft Lead with SAE Flat Connecter, and 2 ft battery connection adapters (battery clip adapter, and 3/8" ring terminal adapter)
• Operating Temperature: 14° to 113°F (-10 to 45°C)
• Storage Temperature: -13° to 185°F (-25 to 85°C)
• Operating Humidity Range: 0 to 90% RH
• Cooling: Passive / Natural
• Unit Length: 3.94"
• Unit Width: 2.56"
• Unit Height: 1.42"
• Unit Weight: 1.0 lbs.
• Approvals: UL/cUL, FCC, CEC, BC
• Battery Capacity - Charging: 3-20AH
• Battery Capacity - Maintaining: 3-60AH
• Warranty: 2 Year Limited

What's in the Box

• Wall-Mount Charger with 10 ft DC Lead (120") terminating with standard SAE Flat Connector
• DC Lead Adapter: 2 ft (24") with Battery Clips / standard SAE Connector
• DC Lead Adapter: 2 ft (24") with inline 3A fuse and 3/8" Ring Terminals / standard SAE Connector
• User Manual

Operation

• Not intended for use as a DC power supply
• Operate in an environment with proper ventilation
• Do not operate in a damp or wet environment

LED Status Indicator Light in normal charge cycle:
• Red LED ON - AC Power connected
• Yellow LED ON - Charge Mode
• Green LED ON - Battery charged, charger in Maintenance/Float mode

Information Downloads

CM1A User Manual