GMB Water Pump for OLD Suzuki Baleno, Swift, Alto 1984-2006 (G10/G13/G16 Engines) - GWS-15A

Vehicle Fitment & Part Details

GMB water pump for the original Suzuki Baleno Hatchback / Saloon / Estate (EG, 1995-2002) with the 1.3 i 16V G13BB petrol engine, OE 17400-82850. 4-bolt mounting pattern with M6 threaded holes, 42mm bolt spacing, 60mm impeller diameter, 95mm overall height. Also covers the older Suzuki Swift I (AA, 1984-1989), Swift II (1989-2005), Alto IV (EF, 1994-2002), Alto V (2000-2002), Carry (1999-2006), and Wagon R+ (MA, 2000-2006) across the older G10, G13, and G16 petrol engine range. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine information where variants exist.

Key Details

SKU

GWS-15A

Component

Water Pump

Brand

GMB

Generation

OLD / first-generation Suzuki models (1984-2006) with G10 / G13 / G16 engines only — NOT for new Baleno (2016+), new Alto, or current Swift (2005+)

Primary Fitment

Suzuki Baleno Hatchback 1.3 i 16V SY413 G13BB 63kW (07/1995-05/2002)

Specs

95mm overall height, 4 mounting bores, 42mm bolt spacing, M6 thread, 60mm impeller diameter

Key Benefits

• Genuine GMB brand — long-established Japanese OEM water pump manufacturer with strong Suzuki application coverage
• Six Suzuki OEM reference numbers listed for cross-checking against the original pump before ordering
• Physical dimensions listed for direct comparison against your removed pump: 4-bolt M6 pattern, 42mm spacing, 60mm impeller

OEM Reference Numbers

• Suzuki: 17400-82820
• Suzuki: 17400-82823
• Suzuki: 17400-82824
• Suzuki: 17400-82850
• Suzuki: 17400-82851
• Suzuki: 17400-M82861

Product Specifications

Vehicle Fitment — OLD Models Only

This listing covers the original/older generations of these Suzuki models, built 1984-2006. It does NOT fit the current/modern versions sold in SA from 2010 onwards.

Includes 22 supplied applications.

Fitment Notes

• Generation check first: If your Suzuki was first registered in SA from 2010 onwards (including the new Baleno from 2016, the current Alto, or the current Swift), this is NOT the correct water pump. Those vehicles use K-series engines with a different pump specification.
• Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist. The engine code must be one of: G10A, G10B, G10BB, G13A, G13BA, G13BB, or G16B.
• Some Suzuki models in the supplied fitment list (e.g. Wagon R+, Swift I, early Carry) were not official SA-market imports — this listing supports private imports, used imports, and legacy stock.
• Verify the physical dimensions of your removed pump against the specifications above — 4-bolt M6 mounting with 42mm spacing and 60mm impeller diameter.

Installation / Use / Maintenance Tips

• Drain the cooling system fully and catch coolant in a clean container if it is to be reused — or dispose of it according to local regulations if contaminated.
• Clean both mating surfaces (pump and block/timing cover) thoroughly before fitting the new gasket or O-ring. Do not use sealant unless the manufacturer specifies it.
• Tighten the mounting bolts evenly in a cross pattern to the manufacturer's torque specification; over-torquing the M6 threads will strip the housing.
• Replace the timing belt (where the pump is driven by it) at the same time — the small additional cost avoids a second disassembly later.
• Refill with the correct Suzuki-spec coolant, bleed the cooling system fully, and run the engine up to operating temperature while checking for leaks and confirming correct thermostat/fan operation.

Common Questions

Is this for the new Baleno (2016 onwards)?
No. The new Baleno sold in SA from 2016 uses a completely different water pump. This part is only for the original/old Baleno (EG chassis, 1995-2002) with the G13BB, G13BA, or G16B engine.

Is this for the current Alto / Alto 800 sold in SA today?
No. The current Alto and Alto 800 use the K10B / K10C engine with a different water pump. This part is only for the older Alto IV (1994-2002) and Alto V (2000-2002) with the G10B or G10BB engine.

Is this for the current Swift (Swift III, IV, V, or VI)?
No. The Swift from 2005 onwards uses M13A / K12B / K12C engines with a different water pump. This part is only for the older Swift I (1984-1989) and Swift II (1989-2005) with G10A, G13A, or G13BA engines.

How do I know if my Suzuki has a G-series engine?
Check the engine code stamped on the engine block or the VIN plate. G-series engine codes start with "G" followed by two digits and a letter (e.g. G13BB, G16B, G10A). If your engine code starts with "K" (e.g. K12M, K14M, K10B), this is NOT the correct water pump.

Will this GMB water pump fit my old Suzuki?
Yes, provided your Suzuki is one of the older models listed above with a G10, G13, or G16 engine, and the OE number on your removed pump matches one of the 17400-series references listed.

What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original pump before ordering.

How do I confirm fitment if there are multiple variants?
Use VIN, engine code (must start with G, not K), and the physical dimensions of the removed pump (bolt pattern, impeller diameter, overall height) and compare them to the fitment and specifications sections above. If unsure, request fitment assistance before ordering.