Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli 4.5" Commuter 2.0 Suspension System 11-16 Ford 6.7L PowerstrokeThe Commuter 2. 0 Suspension System from Carli is about leveling your truck the RIGHT way. It's designed for people seeking a little bit of off roading while still maintaining good on road driving. Utilizing Carli SPEC 2. 0 diameter shocks tuned for off road use as well as all around comfort and ride quality while driving in town, on the highway, towing, or hauling. Carli SPEC 2. 0 boasts an aluminum body, hardened steel shaft, and full rebuild
The Commuter 2.0 Suspension System from Carli is about leveling your truck the RIGHT way. It's designed for people seeking a little bit of off-roading while still maintaining good on-road driving. Utilizing Carli SPEC 2.0″ diameter shocks tuned for off road use as well as all-around comfort and ride quality while driving in town, on the highway, towing, or hauling. Carli SPEC 2.0 boasts an aluminum body, hardened steel shaft, and full rebuild-ability. The shocks contain premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. Your truck will sit 4.5” higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. To accommodate the additional height and travel, the kit contains radius arm drop brackets, improved brake lines, an adjustable track bar, and caster adjusters to improve on the stock handling.
REAR LEAF SPRING OPTIONSThis system is designed to be paired with a rear leaf spring upgrade to achieve the proper stance.
(after selecting an option, you can view an image of it by clicking through the images above)
-
Add-a-Pack
- Replaces the stiff overload leaf with a pack of 6 progressive leafs for a smoother ride
- Maintains original load carrying capacity
- Provides 2" of lift
-
Full Progressive Leaf Spring Kit
- Replaces stock 5 leaf design with a 12 leaf progressive design for a smoother ride
- Only a slight reduction from a standard 3/4-ton load capacity
- Rear will be 1" higher than front when paired with the 4.5″ front suspension system
ADDITIONAL UPGRAGES:
-
Sway Bar Drop Brackets
- Required in order to correct the sway bar geometry on 4.5" lifts
- Direct Bolt-in
- Unhindered Articulation
-
Carrier Bearing Drop
- Required if your truck has a 2-piece driveshaft
- Prevents take-off shudder/driveline vibration
-
Upgraded Radius Arms
- Replaces flimsy stock arms with heavy duty design
- Caster adjustment from 0.5° to 2.5°
-
Low Mount Steering Stabilizer
- Adjustable pressure and custom valving for larger tires
- Includes differential guard and clamp
-
High Mount Steering Stabilizer
- Higher pressure to handle larger tires
- Designed for leveled and lifted trucks
- Will NOT work with dropped pitman arm
-
Upgraded Rear Leaf Spring Shackles
- Large free-floating bushings
- Far better ride than factory shackles
IMPORTANT NOTES:
- Wheels: Carli recommends a 17"-18" wheel, no more than 9" wide with 5" of backspacing
- Tires: 37", E-rated tire is recommended. Tire pressure 45psi front, 40psi rear
- Configuration: Carli 4.5" leveling systems are designed and tested on vehicles with 17"-18" wheels with 37", E-rated tires. Running stock wheels and tires or a larger wheel diameter will result in a stiffer ride.
- Add-a-Pack: Super Duties equipped with a 2″ block from the factory will require the factory 3-5/8″ block to achieve a leveled stance (Part numbers 7C3Z-5598-HB, and 7C3Z-5598-JB). Fits 3.5″ axle tube.
- Full Rear Leaf Spring Kits: Full leaf spring kits require NO BLOCKS to achieve a proper stance.
NO LEAF SPRING OPTION NOTES:
- Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any leaf spring provisions.
NO SWAY BAR OPTION NOTES:
- Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any sway bar drop or Torsion Sway Bar provisions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 2143 reviews
Sort
Product Reviews
★★★★★ 5
It Works!!!!!
Size: Powder Poli Ox - Pack of 6
We have only completed the first two steps it Poly Glo set we purchased and has it ever made a difference in the look of our hauler/trailer! The dull oxidize black color is somewhat shiny. Cant wait to put the final two steps on it! A little elbow grease and work did wonders! We will share a photo once the procedure is complete!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 4
Could be good
Size: Powder Poli Ox - Pack of 6
I cleaned my RV very thorough from top to bottom before even starting the process with the Poli Glow system. Here's what I learned despite videos and lots of reading reviews.
1. Must be very clean and clear of anything you dont want to stick and show on your final outcome.
2. It takes more coats than you think it would (after 3 coats) it was still really streaky and I was starting to regret using Poli Glow. I ended around 7-8 coats and my rig had no major oxidation at all.
3. As one reviewer said, use a clean microfiber cloth v the applicator that comes with it, I found much better results with no lines.
4. Dont go to heavy on the coating, the instructions say this, but I went super light and it can be very easy to get lines with heavier application.
5. Dont look at your work after 3 coats, you will feel deflated, just keep going for at least 6 coats and then look at your work.
6. Only do small areas and look out for drips and lines, you need to get them out right away.
7. I did not use the Poli Ox, I was able to get any oxidation out with just the Poli Prep
8. Going up and down a ladder for hours sucks!
9. I hope it will come off in the next couple of years when I plan to replace the decals. Honestly, thats my biggest fear is how hard it will be to remove when the time comes.
10. After a scary start, I will say it did turn out pretty nice, was it easy, nope, would I do it again? Not sure, I need some time for my back to heal up!
If you do choose Poli Glow know there are other options that maybe a better way to go such as wet sanding etc. Poli Glow is pretty good, but it can be pretty bad also if the surface is not cleaned and the Poli Glow applied correctly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 17, 2023
★★★★★ 5
Poli glow works!
Size: Powder Poli Ox - Pack of 6, Size: Powder Poli Ox - Pack of 6
Works amazing! After many attempts to buff I purchased Poli glow and done in less than half the time and beautiful result.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
Wonderful product
Size: Powder Poli Ox - Pack of 6
This product has exceeded our expectations.
Thank you
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 3
Good but DO NOT USE APPLICATOR MITT
Size: Powder Poli Ox - Pack of 6, Size: Powder Poli Ox - Pack of 6
The poli-ox worked well, just know that it will require several applications to remove old buildup and oxidation. once you are done, the paint will still look oxidized, but once you put the sealer on, the color will be deep and shiny.
The sealer itself is supposed to be enough for a much bigger RV than we used it for. (17') We used 3/4 of a bottle for 1 side, due to the fact that we would remove and start over because it left ridges like a brush in paint. On the second side of the RV, we scrapped using the Mitt, and low and behold, using a microfiber towel to apply solved all of the issues. No more ridges and the remaining 1/4 of the bottle was enough to apply 5 coats. The mitt also wastes a LOT of product. So be warned use a Microfiber towel (that has been previously washed) and it will save you a LOT of time, money and angst.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2023