676309 - 90 Amp Waterproof Panel Mount Circuit Breaker, 32V DC Auto-Reset, 1/4-28 Studs

676309 - 90 Amp Waterproof Panel Mount Circuit Breaker, 32V DC Auto-Reset, 1/4-28 Studs90 Amp Waterproof, Ignition Protected Panel Mount Circuit Breaker, 32V DC Auto Reset, 1 4 28 Studs Hi Amp auto reset circuit breakers are designed to operate cycle continuously during an overcurrent condition in DC applications. These Type I Circuit Breakers feature an internal composite alloy material which normally holds the contacts closed, but deflects and separates the contacts when an over current situation occurs. It then returns to the run

90 Amp Waterproof, Ignition Protected Panel Mount Circuit Breaker, 32V DC Auto-Reset, 1/4-28 Studs

Hi-Amp auto reset circuit breakers are designed to operate/cycle continuously during an overcurrent condition in DC applications. These Type I Circuit Breakers feature an internal composite alloy material which normally holds the contacts closed, but deflects and separates the contacts when an over-current situation occurs. It then returns to the run mode as the breaker cools.

- Auto-Reset - will continue to recycle until the source of the overcurrent is removed or corrected
- Designed for easy mounting to a panel using 1/4 in or 6mm bolt or screw
- Waterproof and Dustproof to IP67
- Ignition Protected - Sealed for engine compartment and bilge area applications

Replaces
Century 246-409-666
Century S29420-12
Goodall 51-240
John Deere PT21013
Schauer 0505-023733
Schumacher 3999000107
Schumacher 3999-000-107

Specifications

Function Type: Type I Thermal Trip-free, Cycling
Number of Poles: Single Pole, Normal Closed
Maximum Current and Voltage Ratings: 90A @ 32VDC
Calibration @ 25C: 100% Hold, 135% Trip (percent of rating)
Maximum Interrupting Capacity: 3,000A 32VDC
Termination: 1/4" - 28 Studs, Stainless Steel
Length: 2.95 in / 74.9 mm
Width: 1.93 in / 49.0 mm
Height (housing): 0.91 in / 23.1 mm
Height (over terminals): 1.46 in / 37.1 mm 
Weight: 0.17 lbs / 76 g
Mounting: Panel Mount
Housing Material: Thermal Plastic
Operating Temperature: -32°C to 82°C (-25°F to 180°F)
Storage Temperature: -34°C to 149°C (-30°F to 300°F)
Ingress Protection: Splash and dust proof to IP67, sealed for engine compartment and bilge area applications.
Compliances: SAE J1625, ABYC E-11, CE, SAE J1117 (Ignition Protected), IP67