SKU: 76108446997

Pololu Multi-Hub Wheel w/Inserts for 3mm and 4mm Shafts - 80x10mm, Black, 2-Pack Pololu 3690

Sale price$10.38 Regular price$11.53
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Pololu Multi-Hub Wheel w/Inserts for 3mm and 4mm Shafts - 80x10mm, Black, 2-Pack Pololu 3690These versatile black plastic wheels have silicone tires and measure 80 mm (3. 15) in diameter. What makes them special is the included set of interchangeable collets that can be inserted into the wheel to firmly grab four different shaft types: 3mm D, 3mm round, 4mm D, and 4mm round. The collet inserts start with a comfortably loose fit on their intended shafts, and unlike simple press fit wheels, their grip on the shaft gets progressively tighter as

These versatile black plastic wheels have silicone tires and measure 80 mm (3.15″) in diameter. What makes them special is the included set of interchangeable collets that can be inserted into the wheel to firmly grab four different shaft types: 3mm D, 3mm round, 4mm D, and 4mm round. The collet inserts start with a comfortably loose fit on their intended shafts, and unlike simple press-fit wheels, their grip on the shaft gets progressively tighter as they are compressed into the wheel disc, reducing the chances that the shaft will be able to slip within the wheel. This product is a pair of wheels.


Overview

These versatile wheels use interchangeable collets to tightly grab a variety of different common motor shafts, including the 3mm D-shafts on our micro metal gearmotors and mini plastic gearmotors and the 4mm D-shafts on our 20D metal gearmotors and 25D metal gearmotors. The wheels are 80 mm in diameter with 10 mm wide silicone tires, and they are available in black or white.

Black 80×10mm Pololu Multi-Hub Wheel installed on a 4mm D-shaft.

White 80×10mm Pololu Multi-Hub Wheel installed on a 3mm D-shaft.

80×10mm Pololu Multi-Hub Wheel installed on the 4mm D-shaft of a 20D metal gearmotor.

80×10mm Pololu Multi-Hub Wheel installed on the 3mm D-shaft of a micro metal gearmotor.

Four different collet inserts are included per wheel, allowing the wheel to work with four different shaft types: 3mm D, 3mm round, 4mm D, and 4mm round. The collet inserts slide easily onto their intended shafts and then clamp down as they are compressed into the wheel disc, resulting in a fit that is much tighter than can be achieved with similar press-fit wheels. The combined thickness of the collet and collet plate is approximately 6 mm, so we recommend you use this wheel with motors that have shafts that are at least 7.5 mm long. See the dimension diagram (384k pdf) for more information.

 

Pololu Multi-Hub Wheel collet inserts: 3mm round, 3mm D, 4mm round, and 4mm D.

Details for item #3690

This product is a pair of black 80×10mm wheels, and it consists of two sets of the following parts:

 

Pololu Multi-Hub Wheel w/Inserts for 3mm and 4mm Shafts – 80×10mm, Black, 2-pack.

  • silicone tire
  • black ABS wheel disc
  • four black ABS collet inserts:
    • collet for 3mm D-shafts
    • collet for 3mm round shafts
    • collet for 4mm D-shafts
    • collet for 4mm round shafts
  • threaded metal collet plate
  • three 7mm-long M3 screws

Using the wheel

 

 

Installing the Pololu Multi-Hub Wheel on a motor shaft.

  1. Insert the motor shaft through the hole in the middle of the collet plate, making sure that the protrusions around the three threaded holes are facing out, away from the motor. Warning: these protrusions can be sharp!
  2. Slide the appropriate collet onto the motor shaft, making sure that the embossed digit (i.e. the “3” or “4”) is facing out, away from the motor.
  3. Slide the wheel on to the motor shaft with the embossed Pololu logo facing out, away from the motor, and press it onto the collet firmly, which will cause the collet to start squeezing down on the shaft. If you have the collet or wheel backward, the collet will not fit into the hole in the wheel.
  4. Insert three M3 screws through every other hole in the wheel and start screwing them into the threaded holes in the collet plate. Tighten each screw a little at a time so the wheel is pulled onto the collet evenly. For typical shafts, you will be able to tighten until the collet plate is almost flush with the back of the wheel, and the front of the collet is almost flush with the front of the wheel. If your shaft is a little larger than nominal, the collet might not press as far into the wheel, and if your shaft is a little smaller than nominal, you can insert something like a small washer between the collet plate and the collet to let it push the collet even farther into the wheel (i.e. past flush). Be careful not to over-tighten the screws as this can strip the threading on the collet plate.

Note that it is possible to assemble the wheels with a little wobble, but if that is a concern in your application, you can adjust how you tighten the three screws to get it as lined up as you like. Alternatively, you can often also fix a wobble just by pushing hard on the rim of the wheel at place where it’s most out of alignment.

The hole spacing on these wheels also works with our larger Universal Mounting Hubs (6 mm diameter and up), which can be used to adapt these wheels to motors with larger shafts, like our 37D metal gearmotor shown here:

If you get an M3 version of the universal mounting hub, you can use the 7 mm M3 screws that are included with the wheel to mount them together. However, please note that those screws will only go about 2 mm into the universal mounting hub, so you might consider getting longer screws (like 10 mm M3) for a more secure setup.

Specifications

Parameter Value
Size 80 × 10 mm
Weight 23 g
Shaft type 3mm D, 3mm round, 4mm D, 4mm round
Color black

Resources

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 76108446997

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 958 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Shattered Glass
Louisville, US
★★★★★ 5
Subtle smell, works well to pick up dirt!
Size: 8 Fl Oz (Pack of 2)
Has a nice, light smell when added to the Eufy C20 water. Smell is short-lasting and very subtle, so no irritation to the animals in the house. Easy to use, a small amount is recommended, and I find it works well. Very good value for long-lasting use. 1 cap/water refill, and the water is much nastier than it was when using just water. Very pleased with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2026
I
Verified Purchase
Isabel Sosa
Draper, US
★★★★★ 5
Easy cleaning and pleasant scent.
Size: 8 Fl Oz (Pack of 2)
It works very well with the robot vacuum cleaner. It cleans the floor without damaging it, leaves no residue or marks, and leaves a soft, pleasant scent. It lasts a long time and doesn't cause any problems for the device. A very good product; I would definitely buy it again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2026
A
Verified Purchase
Amazon Customer
Pawtucket, US
★★★★★ 5
So Worth the Purchase !!!
Size: 8 Fl Oz (Pack of 2)
I was a little hesitant to buy this since it’s a bit pricey for a floor-cleaning liquid. Still, I decided to give it a shot because the floor in my new apartment smelled stinky due to the pet urine from the previous tenant. It turned out to be totally worth the investment! The floor gets much cleaner with this product—the dirty water tank ends up way dirtier than usual—and the Eufy mop pads no longer smell bad like they used to without this liquid. Also, just a little goes a long way. I fill the tank to the max with water and add about 15ml of this liquid. The instructions say to dilute 10ml in 2 liters of water, and my tank holds about 2.5 liters. So with one bottle, I can refill the tank around 31 times—which is a lot! Since it needs to be heavily diluted, I don’t notice much of the scent after mopping. I do wish it had a stronger fragrance, but it gets the job done, so I’m very satisfied!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 30, 2025
B
Verified Purchase
blackstarrs3
Boise, US
★★★★★ 4
Works good but doesn’t make the house smell nice
Size: 8 Fl Oz (Pack of 2)
This works good in our robot vac/mop however it doesn’t make the house smell good when the house is mopped, just when you put it in the water tank. The floors are clean and that’s all I really care about but would it be nice to smell freshly mopped, yes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
B
Verified Purchase
Bmcsloth
Bozeman, US
★★★★★ 5
Amazing and it works great!
Size: 8 Fl Oz (Pack of 2)
I love this products. I wish they have other scent for the different season. Overall, this is worth it. I love my vacuum and this product. My floors are always clean and smells great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2026

recommand products