Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kawasaki CARBURETOR-ASSY15004-7003A worn or clogged carburetor is one of the most common causes of poor engine performance this genuine OEM replacement fixes it right the first time. Compatibility FR series (verify your model number before purchasing) FS series FX series Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants. Part Details OEM Part
A worn or clogged carburetor is one of the most common causes of poor engine performance — this genuine OEM replacement fixes it right the first time.
✅ Compatibility
- FR series (verify your model number before purchasing)
- FS series
- FX series
⚠️ Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants.
🛠️ Part Details
- OEM Part Number: 15004-7003
- Replaces: Verify with your Kawasaki dealer or engine manual
- Brand: Kawasaki — Genuine OEM
- Type: Original Equipment Manufacturer (OEM) replacement
⭐ Key Features
- Genuine OEM construction — matches original factory specifications exactly
- Precisely calibrated main and pilot jets for correct air-fuel ratio
- Includes all necessary gaskets and seals for a complete installation
- Corrosion-resistant body designed for outdoor equipment environments
- Plug-and-play fit — no modifications required
🔧 What Problem This Solves
- Engine hard to start or won't start at all
- Rough or unstable idle speed
- Loss of power under load or at full throttle
- Black smoke from exhaust (rich condition)
- Fuel leaking from the carburetor body or bowl
- Engine surging or hunting at steady throttle
📏 Specifications
- Part Name: Carburetor Assembly
- Material: Zinc alloy body with brass jets and rubber gaskets
- Manufacturer: Kawasaki
- Condition: New — Genuine OEM
🔨 Installation
- Difficulty: Moderate
- Tools Required: Flathead and Phillips screwdrivers, 8mm and 10mm wrenches, Needle-nose pliers, Carburetor cleaner spray
- Estimated Time: 30–60 minutes
- Tip: Always consult your Kawasaki engine service manual for torque specifications and step-by-step procedures.
💪 Why Choose This Part
Replacing with a genuine Kawasaki carburetor eliminates guesswork and avoids the repeated frustration of cheap aftermarket failures.
🛒 Order With Confidence
✓ Genuine OEM — Guaranteed Fit — This is a genuine Kawasaki OEM part backed by the manufacturer's quality guarantee. If you have any questions about compatibility, provide your engine model and serial number and our team will confirm fitment before you purchase.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 348 reviews
Sort
Product Reviews
★★★★★ 3
Orange looking, but large capacity
Size: One Size, Color: Brown
I ended up returning this product, it looks more orange in color than what is pictured. Also, it doesn't smell like leather. On a positive note, it was inexpensive and did have a large organization capacity.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025
★★★★★ 5
Best wallet on the market.
Size: One Size, Color: Nubuck Black, Size: One Size, Color: Nubuck Black
This is the only wallet I buy now. Over and over. I like simple wallets. No bifold. Trifolds hurt your back. Hard case are a mess that rub your credit card mag strips off from friction. I found this a few years back and have bought 3. I am a stone worker so mine get worn from the dust and grit in my pockets faster than normal wear and I need to swap them out every couple of years. I like the simplicity and the fact that the pockets are stitched the same depth so your cards stack like varying length stair-style tabs rather than all the same depth. Wallet is RDIF protection lined. I can put like 15 cards in this wallet and it’s still thinner than a bifold holding 5. I love it. I mean it. I haven’t found a better wallet than this one. They are very well-built. Picture shows wallet with 19 cards + 40 dollars. 3/4 of an inch thick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2025
★★★★★ 5
Alpine Swiss makes such a good product, well, I purchased three!
Size: One Size, Color: Nubuck Tan
These leather money clips will not disappoint. Great craftsmanship at a great price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 4
Good Product
Size: One Size, Color: Smooth Finish Black
Good product although the leather is a bit stiff. Hopefully it will soften up over time. Fair price, fast shipping…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2025
★★★★★ 5
So far happy.
Size: One Size, Color: Glossy Nappa Black
As everyone has made clear, it holds credit cards very tight. Almost 3 weeks in & mine seems to be breaking in a little, but cards are still a bit difficult to remove. No complaints with money clip.
One thing I thought was a dumb move on manufacturers part, was inside one of the card slots is a tag sewn into the seem. This makes things alot worse while trying to fit cards into all slots. The tag will catch on the cards & bunch up in the corner of the slot making things even tighter in that slot, plus all slots surrounding it.
I was able to get a scissors in there enough to cut most of the tag out, without cutting the stitching itself....it made a big difference....enough to fit an extra card in & without it bulging up the wallet overall.
Why would they feel it necessary to do this is beyond my pay grade. Its not like you can even see what the tag says until you cut it out.... I believe it was the name & logo....but Jesus, how unnecessary, & in the dumbest place one could possibly think of. Especially when EVERYONE comments on how excessively tight it is to fit cards in the slots & also be able to retrieve them with relative ease when needed.
Overall I am happy with this wallet so far.... I'll be interested to see if it holds together over the long haul or if the stitching gives out in a year & has to be replaced.
I will update this review as time progresses.
UPDATE: Its almost to March 27 2023 & its been holding up great. No ripping or tearing stitching holding strong.
Still holds cards really tight, but they are easier to remove.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2022