Street Legal Kit for Kymco UTVs and SXS by Ryco

Street Legal Kit for Kymco UTVs and SXS by RycoFits all Kymco models from 2008 2021 Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris digital dash a green light flashes on each side of the dash to indicate when the signal is actuated for left or right. The analog dash has one green (<>) light in the middle that flashes (see retrofit note

Fits all Kymco models from 2008-2021

Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris digital dash a green light flashes on each side of the dash to indicate when the signal is actuated for left or right. The analog dash has one green (<>) light in the middle that flashes (see retrofit note below for older kits).Three LED lights are used for each left and right turn front turn signal with a steering column mounted signal stat that also includes the horn button. The factory rear tail lights are used for the left and right turn signals. Illuminated license plate holder with night time running lights are integrated into the system to meet state regulations for highway vehicles. Wiring harness and detailed instructions are included with each kit. Satisfaction guaranteed.

• Self Canceling if you forget and leave the blinker on (turns off blinker after a couple of minutes)

Kits contain:

• 1x Wiring Harness
• 6x LED Mini Lights with Bullet Ends for front turn signals
• 2X Rear tail lights use factory tail lights for a clean professional look
• 1X License plate holder and LED light
• 1X Loud Horn (105 db)
• 1x Electronic LED Flasher
• 2x LED Turn Indicator Lights (left and  right)
• Kit can integrate with factory speedometer to indicate turn signal flashing
• 1x Horn Push-button Switch integrated with the signal stat
• 1X Waterproof Signal Stat
• 2x Lead Wires for Indicator Light with Butt Connectors
• 4x Spade Terminals for Horn and Horn Switch
• 12x Female Bullet Terminals for the Mini Lights
• Complete wiring harness
• 1x Instruction Sheet
• 10x Wire Ties

Other applications available if yours is not listed. Call with your brand, model, and year (801 367 1395)

Note: UTVs equipped with front bumpers may require locating front signal lights inboard and or outboard of the headlights.

No returns if sealed wiring packets are opened or box contents are installed.

Free shipping with in the lower 48 states.

Please call if you cannot find your model. Ryco has the kit! 801 367 1395

ecs 6-4-26