Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
AEM 14-16 Mazda 6 2.5L - Cold Air Intake SystemThe AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is
The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2018 | Mazda | 3 | Grand Touring |
| 2014-2016 | Mazda | 3 | s Grand Touring |
| 2014-2016 | Mazda | 3 | s Touring |
| 2017-2018 | Mazda | 3 | Touring |
| 2014-2020 | Mazda | 6 | Grand Touring |
| 2018-2020 | Mazda | 6 | Signature |
| 2014-2021 | Mazda | 6 | Sport |
| 2014-2021 | Mazda | 6 | Touring |
| 2017 | Mazda | CX-5 | Grand Select |
| 2015-2017 | Mazda | CX-5 | Grand Touring |
| 2015-2017 | Mazda | CX-5 | Sport |
| 2015-2017 | Mazda | CX-5 | Touring |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 2436 reviews
Sort
Product Reviews
★★★★★ 5
Not 6 ft
Color: Grey, Size: 34" - 3 Panel
I bought this for filming my auditions. I am 5’4” .The height lists is 6 ft but the fabric only reaches 5’9 1/2 “!
when I must film myself head to toe, the top bars are showing. It’s easy to set up. But when I film I must tilt my camera to keep the top bars out of frame which is not acceptable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 4
Perfect for what I needed - getting a 2nd one.
Color: Black, Size: 22" - 4 Panel
Putting it together was a BEE-OTCH!! Yes, one of the tubes had the top cap installed at the wrong end (& getting it off required tools), and yes, stretching the fabric to get the screws in was incredibly hard...but am I buying another one? YES! After all is said and done, this is a great room divider. I opted out of installing the paddle feet & it still works perfect. It won't filter light all that great and even though it stands on its own, it can be blown over easily - but for the price? Excellent. If I wanted a heavy duty, thicker, more expensive one, I would've bought one.
The 2nd one is on the way.
Perfect height, no weird smell, nice and light and easy to move around.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
★★★★★ 5
WHERE HAVE YOU BEEN 😊
Color: Grey, Size: 34" - 3 Panel
I purchased RANTILA 3 Panel Room Divider, 6 Ft Tall Folding Privacy Screen Freestanding Room Partition Wall Dividers, 102''W x 20''D x 71''H, Grey. For outdoor use on my patio is perfect . PRIVACY!!! YAY!
It was packaged very carefully. There were no missing parts. Instructions were there but I still had to use the video visually. A few screws would not screw in. So I used a hammer with a few good taps that helped using the screw driver. 😊 It was easy putting it together following the directions. Everything is well made. Love the height, functionality and it’s definitely light it works.
Thank you
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2025
★★★★★ 5
I am happy with the room divider. It does what I intended.
Color: Beige, Size: 34" - 3 Panel
Use a power screwdriver.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
★★★★★ 3
It’s really pretty decent except for one thing.
Color: Grey, Size: 34" - 4 Panel, Color: Grey, Size: 34" - 4 Panel
I bought two of these for my basement and they do look great. They were easy to assemble and I’m happy with them. The problem is that the stitching on the fabric panels are almost the size of a machine basting stitch (which for non sewers means large temporary stitches). Because the panels are tight by design, the stitches had already started to come undone before I could finish assembling everything. Fortunately I can sew and I reinforced all the panels. I had to take the first ones back off the poles to do them but I did the second set before assembling. It’s really not a bad product for the money. It’s quality fabric and the design itself looks great. The stitching looks fine but it’s just not substantial enough for the purpose it is supposed to serve. I can’t imagine why it be sewn so insufficiently. I was able to resolve my issue because I can sew. I wasn’t planning on sewing nor did I really have the time. I could have made it myself but I didn’t want to and that is why I purchased this. I ended up using valuable time. The really unfortunate thing is, I have no other complaints. This is a manufacturing problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 3, 2023
recommand products
Schultz 7812009 Direct-Fit Tail Pipe for 1997-1999 Honda CRV 2.0L F/R
110.84
Schultz 7712064 Direct-Fit Converter for 1993 - 1995 Beretta 2.2L
141.10
Schultz 7712086 Direct-Fit Converter for 2002 - 2006 Honda CR-V 2.4L
139.57
Dinan Performance Spring Set For BMW F30 335i 340i xDrive D100-0912
174.97
Direct-Fit Converter for 1992-1995 Honda Civic Rear Schultz 7712006
157.87