Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kawasaki CHAMBER-FLOAT316614-6130AThis genuine OEM Kawasaki part is manufactured to the exact specifications of the original component ensuring correct fit, function and durability for your engine. Compatibility FH series (verify your model number before purchasing) FX series FR series FS series Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between
This genuine OEM Kawasaki part is manufactured to the exact specifications of the original component — ensuring correct fit, function and durability for your engine.
✅ Compatibility
- FH series (verify your model number before purchasing)
- FX series
- FR series
- FS series
⚠️ Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants.
🛠️ Part Details
- OEM Part Number: 316614-6130A
- Supersedes / Replaces: 160202078
- Brand: Kawasaki — Genuine OEM
- Type: Original Equipment Manufacturer (OEM) replacement
⭐ Key Features
- Genuine OEM part manufactured to Kawasaki factory specifications
- Direct replacement — no modifications, drilling or adapting required
- Engineered for the temperature, vibration and load demands of commercial outdoor equipment
- Quality-controlled and tested to Kawasaki's standards
- Correct fit eliminates compatibility risks associated with aftermarket alternatives
🔧 What Problem This Solves
- Engine or equipment not performing correctly due to worn or damaged original part
- Component failure causing downtime or unsafe operating conditions
- Original part no longer sealing, engaging or functioning as designed
📏 Specifications
- Part Name: Chamber-Float316614-6130A
- Material: Refer to OEM specifications for your engine model
- Manufacturer: Kawasaki
- Condition: New — Genuine OEM
🔨 Installation
- Difficulty: Moderate — refer to your engine service manual
- Tools Required: Basic hand tools, Torque wrench, Refer to service manual for specific requirements
- Estimated Time: Varies — refer to your engine's service manual
- Tip: Always consult your Kawasaki engine service manual for torque specifications and step-by-step procedures.
💪 Why Choose This Part
Genuine Kawasaki OEM parts are engineered and tested to the same standards as the parts fitted at the factory.
🛒 Order With Confidence
✓ Genuine OEM — Guaranteed Fit — This is a genuine Kawasaki OEM part backed by the manufacturer's quality guarantee. If you have any questions about compatibility, provide your engine model and serial number and our team will confirm fitment before you purchase.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 2409 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac.
At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025
recommand products
Sliced London Broil, Montreal Seasoned 10oz, with Spinach and Brown Rice
28.45
Sliced London Broil, Plain 10oz, with Green Beans and Basmati Rice
26.95
FruitBlend Flavor for Small Birds 2 lbs (0.91 kg)
14.99
Sliced London Broil, Montreal Seasoned 10oz, with Broccoli and Basmati Rice
26.95
Sliced London Broil, Montreal Seasoned 5oz, with Green Beans and Basmati Rice
16.95