SKU: 48004233898

Neyo Blade One Modelierschere gebogen mittel

Sale price$179.91 Regular price$199.90
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Neyo Blade One Modelierschere gebogen mittelNeyo Blade One Modelierschere gebogen mittel Die Neyo Blade One Modelierschere von Kebelyn ist gebogen mit mittlerer Zahnung und ist perfekt fr mittlelfeine bis feine Schnitte und sanfte bergnge an Beinen, Kopf und Schenkeln geeignet. Fr das perfekte Finish. Aus hochwertigem VG10 Stahl gefertigt Sie schneidet bis zu 35% des Fells eines Hundes sanft und przise. Fr Anfnger und Profis geeignet. aus sehr hartem VG10 Stahl (HRC 60 64) fr Rechtshnder

Neyo Blade One Modelierschere gebogen mittel

Die Neyo Blade One Modelierschere von Kebelyn ist gebogen mit mittlerer Zahnung und ist perfekt für mittlelfeine bis feine Schnitte und sanfte Übergänge an Beinen, Kopf und Schenkeln geeignet. Für das perfekte Finish. Aus hochwertigem VG10 Stahl gefertigt- Sie schneidet bis zu 35% des Fells eines Hundes sanft und präzise. Für Anfänger und Profis geeignet.

  • - aus sehr hartem VG10 Stahl  (HRC 60 - 64)
  • - für Rechtshänder geeignet, Schneideklinge oben, nach unten gebogen
  • - für Linkshänder geeignet, Schneideblatt unten, nach oben gebogen
  • - sehr lange sehr scharf
  • - sehr hochwertig verarbeitet
  • - 6,5 Inch / 16,5 cm. 7,5 Inch/19 cm , ohne Fingerauflage
  • - 36 Zähne und 44 Zähne
  • - incl. weißer Fingerringe und Etui
  • - Hohlschliff
  • - Stellschraubsystem, einfach zu justieren
  • - Hochglanz poliert
  • - rostfrei
  • - ergonomische Griffe
  • - liegt sehr ausgeglichen in der Hand

Pflege

Nach Bedarf einen Tropfen Pflegeöl in den Schraubenschlitz und zwischen die Schneideblätter. Das hält die Schere leichtgängig. Bitte reinige Deine Schere mind. 1x mal täglich nur mit einem weichen Tuch oder Ledertuch.

Immer vom Klingenrücken zur Schneide, um Schnittverletzungen zu vermeiden.

Regelmäßiges justieren der Stellschraube gewährleistet optimales arbeiten. Bitte achte dabei auf die Spannung.

  • Zu geringe Spannung lässt Haare hindurchgleiten.
  • Zu viel Spannung nutzt die Schere nur unnötig ab.
Wie gut ist VG-10 Stahl?

Schnittfestigkeit: Mit einer Härte von 60 -64 HRC ist VG10 ein harter Stahl, der eine hohe Schnitthaltigkeit aufweist. Korrosionsbeständigkeit: Der Chromgehalt von 15,5 % weist auf die ausgezeichnete Korrosionsbeständigkeit von VG10 hin, der daher als einer der besten Stähle in Bezug auf die Korrosionsbeständigkeit gilt.

Die Schere bitte immer geschlossen in einem Etui aufbewahren ( all unsere Scheren werden in einem Etui versandt).

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48004233898

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1627 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
patricia
Dallas, US
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
C
CMC20
Charlottesville, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
M
Mark Weinberg
Belleville, US
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top. The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.) If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
G
Grammar Guru
Phoenix, US
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box. Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT! The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe. While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year. So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
B
Verified Purchase
blt64
West Palm Beach, US
★★★★★ 5
nice sturdy frame
We had a piece of actual wood lane from a bowling alley that i wanted a table made out of. Which made it weigh about 400 pounds, guessing. Our biggest worry about this is the frame holding it up with grandkids around!!! And being able to move it to sit behind it or clean around it when needed. This was what we decided on. Tim said it was super easy to put it together. The height was just a tad taller than our chairs, but there are pieces that can be taken out to accommodate this. When i told my husband it had wheels on it and definitely would aid moving it around. He said oh yeah, that's going to work real well with the weight of this table. And trust me it was said very sarcastically. So, that these worked as well as they have, really impressed him. We have friends that we gave a piece of lane to so they could make a bar in their kitchen out of it. He bought some pipe in town and he paid a heck of a lot more money out than we wanted to put out. So, we were extremely happy to find this. It is sturdy, great value and we are all very happy with it and it looks great! I highly recommend it. I think no matter what you are going to use it for, it is going to fit into any decor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 20, 2025

recommand products